Interestingly within the strut there is a coil spring:
Yeah thats a rear but the front is similar.which strut is that a rear ... i think any block would have to be like a bump stop between the lower arm and.....
Interestingly within the strut there is a coil spring:
Yeah thats a rear but the front is similar.
Indded. Having said that I can't see why it shouldn't be possible to press in a new balljoint assuming one is available in the right size (from looking at my spare front strut).thought so could not see ball joint ,part of front strut.another grand design.no
Indded. Having said that I can't see why it shouldn't be possible to press in a new balljoint assuming one is available in the right size (from looking at my spare front strut).
Your're right - no lower mounting eye.Nope, that's a front one for a W215.
which strut is that a rear ... i think any block would have to be like a bump stop between the lower arm and.....
It's a front one for the W215. Indeed it was a block fitted above the upper arm.
lk i did some research on that about 2 yr ago ,posts on here somewhere ,i found a site offering them ,i seem to remember about 160 euro each ,but out of stock and never able to advise when they would have stock .i to sure it can be done, suspect benz interfered with supply , which prob was same as benz outsource at that time its on here just dont know where as i dont think i started the subject .Indded. Having said that I can't see why it shouldn't be possible to press in a new balljoint assuming one is available in the right size (from looking at my spare front strut).
We started studying this on the forum right when I first joined. The conclusion was that pressing in a new ball joint would be entirely possible and cost around £150 a corner all told- for the 215. New balljoints are available for the 230 already and it's those that seem to wear out, not so much on the 215.
lk found that https://www.abcteile24.de/shop/ see if you can scroll down past all the struts and pumps . the origional subject was lower abc strut ball joint july 19 2016 ajlsl600
lk found that https://www.abcteile24.de/shop/ see if you can scroll down past all the struts and pumps . the origional subject was lower abc strut ball joint july 19 2016 ajlsl600
Don't use them, don't trust them. I still have a €480 pump that failed within 3 days that they've refused to honour their warranty on.
Replacing the ABC with coilovers...............i dont want a stripped out car either nor do i want to be stuck on the side of the road watching a french recovery vehicle tearing the bottom out of my 38,000 mile car because its arse is on the ground and his transporter ramps are not correct for the job. now i would prefer it much more if benz had thought more on that and given the girating mirror a miss . harped on about this before, i retire early next yr and i will ,if i get bored, develop my own metalastic type blocks that can be fitted in such an event, my own version of the plastic shift lock, and a permanent solution to having keyless go turning me into a form filling pedestrian ,should someone develop a decent coil over for the r230 i will investigate that too. tho i would not change abc until i was looking at replacement pump,struts ect of course i could just buy a SL350 ,but the v doz is a silky motor of note ,thats my weak spot for this delightfully styled car.