no start

Hi, I just completed a head gasket replacement on my 1994 e320 m104. Put everything back together and it wouldn't start. I have narrowed it down to lack of fuel. If i cover the air intake in front of the MAF sensor, it turns over and tries to start but fails, or starts but immediately stalls...

Hello, my name is Nicolas, I am 23 years old, I just bought a 420 SEL W126, only the engine does not start, I would like to know how to test the idle valve. Thank you for your help.

Have tried everything with this car that has no start no crank and no commas with ecu. Had electrical guy out who said ecu replace... had ecu cloned.... waste of money ( I checked it myself later and it has 5v ref and check engine displayed) . All electrics on front Sam seem fine except for a...

Hi everyone I dropped my key and it broke apart and snapped the infrared sender off the front of the pcb :-( tried soldering it on and it was barely usable to put back on as the pins were gone, anyway i purchased some spare keys to swap the ir over from one of them and it still wont send a...

hello everyone, im new here and sorry to come in here and immediately ask for help... 2011 c300 4 months ago I had a clog drain on moonroof, lots of water got in and flooded the driver side carpet. I dried it off as best I could and continue to drive as normal, this week coming out of the gas...

i've read a lot about the steering lock mechanism failing and causing (Too)many vehicles not to start and i thought that was my issue as when this first happened last night as the wheel was locked. I had it cranked all the way to the right so i could access the side marker lights (replaced with...

Hey guys. So a month or so back I was removing the exhaust manifold off of my CLK 200 Kompressor to get it welded. When I installed everything back the car started fine. I went inside the house to get changed, went back out 10 minutes later and car wouldn't start! All lights came on dash but...