Engine warning light

[spenttherent]

I've got the engine management light on my 2013 E350 Bluetec and after scanning with my MB v2 it's come up with 2 fault codes which are manufacture specific

Does anybody know what these codes mean?
P13DF and U010E

Would have thought the Mb v2 would tell me itself seeing that it also is manufacture specific

Thanks
Graham

 

[Wighty]

I've got the engine management light on my 2013 E350 Bluetec and after scanning with my MB v2 it's come up with 2 fault codes which are manufacture specific

Does anybody know what these codes mean?
P13DF and U010E

Would have thought the Mb v2 would tell me itself seeing that it also is manufacture specific

Thanks
Graham

Have you tried googling them buddy ?

 

[LostKiwi]

Have you recently had an adblue low error?

 

[spenttherent]

The car was serviced in March and the adblue tank filled and still shows a full tank on the dash, I don't know how accurate it is though, but no errors or warnings before these two yesterday and the car seems to run ok.

I have googled them but nothing seems to come up

 

[Larkone]

I googled them and got these two
https://mbworld.org/forums/glk-class-x204/513207-2014-glk-250-bluetec-adblue-warning-7.html (Ctrl-F and search for p13df)
https://www.obd-codes.com/u010e

 

[spenttherent]

I've just had a look at those two links, doesn't look too good, I was hoping to find something faulty and replace it but seems it's going to be a bit more complicated

I'll check the tank when it stops raining

 

[LostKiwi]

If you clear the codes do they come back?

 

[spenttherent]

The codes do come back yes, but I think I've found the problem.

When I checked the adblue level I found about a gallon of water swilling around all my electrics. There doesn't seem to be any drain holes so I sucked it out with the pela, I dried all the plugs and sockets as best I could now the codes are still there but I can't clear them

 

[LostKiwi]

Get an old sock and fill it full of silica cat litter and pack it near the electronics.
It'll help dry it out. Alternatively if you have a dehumidifier try putting that in the boot.
Once it's dry try to find the leak. Talcilm powder can be useful here. Sprinkle it where you think the water is coming in and look for the trails on the talc.

 

[spenttherent]

Thanks for that, you reminded me that I had some silica bags so I've put them all round the wiring, see what it's like tomorrow. Then I'll get the talc out

 

[spenttherent]

No joy today, everything looks dry but can't clear the codes.
I'm not getting any other warnings and the car seems to run fine but engine light is still on

 

[Steve@Avantgarde]

You will need a session on Xentry star I'm afraid. Obviously a hard fault as the code won't clear.

 

[Steve@Avantgarde]

You will need a session on Xentry star I'm afraid. Obviously a hard fault as the code won't clear.

 

[spenttherent]

Thanks for that Steve, pity you're 200 miles from me.

Does anyone know of a good indie around the Merseyside area ?

 

[Busman48]

Thanks for that Steve, pity you're 200 miles from me.

Does anyone know of a good indie around the Merseyside area ?

Try MB Liverpool on Gt Howard St.

 

[LostKiwi]

@John Laidlaw will know one for sure...

 

[spenttherent]

Not sure if MB Liverpool have star

 

[LostKiwi]

Not sure if MB Liverpool have star

They will have but they'll charge like a wounded bull to put your car on.

 

[John Laidlaw]

Sorry was out of action for a while tonight!
Ok depends where on Merseyside- MD Motorcare in Ellesmere Port - Dave Owens really knows his stuff- MB Tech Warrington of course .... quite a choice round here !

 

[John Laidlaw]

They will have but they'll charge like a wounded bull to put your car on.

MB Liverpool not to be confused with Mercedes Benz of Liverpool Alastair! Former is an Indy who do have Star but I don’t think online - latter of course as you describe ! Good folks though !