Wheel bolts torque settings.

DREAMER NO2

Senior Member
Joined
Dec 29, 2013
Messages
4,903
Reaction score
1,296
Age
79
Location
Kidderminster in Worcestershire
Your Mercedes
W124 2.6E M103 1989
good info

Television another good post for you there .I was looking , as i have removed the first one from the car to refurb by hand. Not to bad realy the reverse was better than the front.It had been washed so many times only primer coat showing in places. Thanks again.
 

S.Speed

Senior Member
Joined
Apr 12, 2009
Messages
5,066
Reaction score
13
Location
Lancashire
Your Mercedes
Older Citroen Now :-(
Last edited:
OP
television

television

Always remembered RIP
Joined
Mar 14, 2005
Messages
164,073
Reaction score
367
Age
89
Location
Daventry
Your Mercedes
2002 SL500, 216 CL500, all fully loaded
  • Thread Starter
  • Thread starter
  • #67
What size bolts will fit mercedes 10 hole alloys on a 1997 w202

As Simon but the length of the M12 bolt will depend on the wheel fitted, the bolt length is important as too long and they will foul the parking brake shoes.
 

darkchild101

Senior Member
Joined
Mar 23, 2013
Messages
298
Reaction score
1
Location
Edinburgh
Your Mercedes
C250 TD/1997/2.5litre
OP
television

television

Always remembered RIP
Joined
Mar 14, 2005
Messages
164,073
Reaction score
367
Age
89
Location
Daventry
Your Mercedes
2002 SL500, 216 CL500, all fully loaded
  • Thread Starter
  • Thread starter
  • #69
Sso is the centre bore the length of the bolt?

The center bore is the diameter of the actual hub that the wheel fit onto, the wheel bolt length depends on the wheel fitted and they can be different
 
OP
television

television

Always remembered RIP
Joined
Mar 14, 2005
Messages
164,073
Reaction score
367
Age
89
Location
Daventry
Your Mercedes
2002 SL500, 216 CL500, all fully loaded
  • Thread Starter
  • Thread starter
  • #72
TV are you sure about the same value for both steel, and alloys. Alloy is softer than steel.

Re normal tightening then yes, just the 1 figure given in WIS
 

rodisi

Senior Member
Joined
Jun 30, 2011
Messages
186
Reaction score
3
Location
Germany
Your Mercedes
E220CDI 1999 W210
The forum never fails me. I'm doing a service on my car, just checked the brakes and putting on the wheels, of course, I forgot the torque. Did a search on duckduckgo.com for mercedes wheel bolt torque and bob's your uncle, I'm in this thread.

Thanks.
 

Alex M Grieve

Senior Member
Joined
Apr 28, 2008
Messages
9,388
Reaction score
60
Location
Broom, Warwickshire
Your Mercedes
B Class d200 Sport Premium Plus (66)
The forum never fails me. I'm doing a service on my car, just checked the brakes and putting on the wheels, of course, I forgot the torque. Did a search on duckduckgo.com for mercedes wheel bolt torque and bob's your uncle, I'm in this thread.

Thanks.

Always good to get it on the correct thread before applying the torque. :rolleyes:
 

ajlsl600

Senior Member
Joined
Nov 18, 2013
Messages
9,031
Reaction score
6,029
Location
france
Your Mercedes
clk3202001,sl6002003 with everything regrettably sold ,A class 170cdi auto. NG/TF1800 ML250
Ft lb and thou for me as well when on my mill or lathe I have to think 2x for metric, I reckon I can see 2c thou comming off! 1000 in inch far easier for crusty me n that how I was trained
 

Stop looking for the Best Garage!! We are here and have the best advanced solutions for you, at Competitive prices. Put us to test with any issue you may have.
Top Bottom