such
Senior Member
- Joined
- Nov 17, 2016
- Messages
- 356
- Reaction score
- 149
- Location
- Sunny Essex Coast
- Your Mercedes
- W212 Eclass 350 CDI Sport 2012
Got everything ready to replace front discs and pads yesterday, removed pads, but was unable to shift the caliper bolts in order to replace disc.
No matter what I tried, it was not moving! Granted I could not get a breaker bar in the space, but I was concerned about the car moving off the axle stand and jack!
Any ideas?
Also, I plan on re-using the caliper bolts with thread-lock, is that ok or get new?
On a positive note, the wear on my EBC redstuff pads was only around 2mm having been on for in excess of 30k miles!
Thanks
No matter what I tried, it was not moving! Granted I could not get a breaker bar in the space, but I was concerned about the car moving off the axle stand and jack!
Any ideas?
Also, I plan on re-using the caliper bolts with thread-lock, is that ok or get new?
On a positive note, the wear on my EBC redstuff pads was only around 2mm having been on for in excess of 30k miles!
Thanks