Peter C1974
Senior Member
- Joined
- Feb 20, 2009
- Messages
- 970
- Reaction score
- 14
- Location
- Buckinghamshire
- Your Mercedes
- 1985 W123 230E & 1991 W124 200E & 1999 W210 E240
Gents,
My W123 saloon is fitted with a factory fitted manually operated sliding sunroof.
The sunroof panel has dropped slightly on one side, by approx 2-3mm. When shut, the rear left edge of the sunroof panel is lower than the roof panel, which allows excess water to collect and drain down the nearside of the car.
I tried pushing on the underside of the panel whilst operating the closing / locking mechanism but that doesn't seem to help.
Any ideas how I can adjust the height of the sunroof panel in closed position?
Regards,
Peter C
My W123 saloon is fitted with a factory fitted manually operated sliding sunroof.
The sunroof panel has dropped slightly on one side, by approx 2-3mm. When shut, the rear left edge of the sunroof panel is lower than the roof panel, which allows excess water to collect and drain down the nearside of the car.
I tried pushing on the underside of the panel whilst operating the closing / locking mechanism but that doesn't seem to help.
Any ideas how I can adjust the height of the sunroof panel in closed position?
Regards,
Peter C