Engine vibrates

[TESTYCOFFEE]

My engine vibrates very noticeably when starting, if I take my foot off the gas pedal it sometimes will shut off. Once I begin driving and the car has warmed a bit the car will operate fine. There are times when I come to a stop light the car will vibrate again if I have on the heat or AC.

Can any one offer remedies? Thank you

 

[NW_Merc]

Crank position sensor on its way out perhaps? You really need to fault codes read to correctly diagnose it.

 

[television]

Crank position sensor on its way out perhaps? You really need to fault codes read to correctly diagnose it.

Not CPS it either works or it does not, possible OVP relay though few 202 cars have them

 

[NW_Merc]

I'd get the codes read first....

 

[television]

A simple blink code reader that I sell should read any codes for a 95 car

 

[NW_Merc]

I've heard they can be inaccurate

 

[television]

I've heard they can be inaccurate

There is no reason for them to be as that is what they were designed to use

 

[Miffy]

As far as I know, the LED blink code reader that consists of a Led, resister, 3 probes and a switch is based on the original MB diagnostic kit for that year of car, and not even sure that Star can read these codes.

 

[Miffy]

and back on topic

 

[television]

The codes that can be read are all here

http://www.mbslk.de/files/artikel/r170_fehlercodes.pdf

 

[Miffy]

The codes that can be read are all here

http://www.mbslk.de/files/artikel/r170_fehlercodes.pdf

I actually have written permission from them to distribute this information

 

[television]

Its all common place on Benzworld and MB world, its where I got it all from

 

[Miffy]

Its all common place on Benzworld and MB world, its where I got it all from

Yes, but not sure they have permission from the copyright holder? I do and I requested it in the name of this forum.

All they demanded was that we ensure their information is listed on each page as it currently is.

 

[whitenemesis]

Yes, but not sure they have permission from the copyright holder? I do and I requested it in the name of this forum.

Our hero!!

 

[television]

Yes, but not sure they have permission from the copyright holder? I do and I requested it in the name of this forum.

All they demanded was that we ensure their information is listed on each page as it currently is.

I understand now and thank you... I have sent it out with the 30 odd code readers that I have sold.

I do not make any profit on them, the part are industrial quality and the parts alone come out at £12 even buying in bulk

 

[Miffy]

I understand now and thank you... I have sent it out with the 30 odd code readers that I have sold.

Yes, thats why I got permission from them, I did PM you about it ages ago

 

[television]

Yes, thats why I got permission from them, I did PM you about it ages ago

Thank you very much,,its an age thing