How does this connector unplug?

[Wighty]

Does cutting the 2 wires help you in any way ?

 

[RhodieBill]

Are you not supposed to actually remove the Wires that are on a Connector inside the Blue Connector? I have seen Merc Connectors like this.....
The blue bit is a part of the Module Assy.

 

[Wearsafoxhat]

Does cutting the 2 wires help you in any way ?

Yup, with those out of the way should get a better view or grip on the offending item !!!!


Sent from my iPad using Tapatalk

 

[DREAMER NO2]

Well 23 posts to remove a silly plug .Good job its not a big end bearing haha .

 

[Wighty]

Have you done it yet

 

[Wighty]

Well 23 posts to remove a silly plug .Good job its not a big end bearing haha .

Correction buddy , 23 posts to NOT remove a silly plug

 

[BillyBoy]

Hard to see as no photo from that angle, but looks as if there is a black locking tab from the module by the number 2 that needs prising towards the blue dot to release the connector.

 

[AMck]

Ok, done

thanks for all the suggestions.

Gave up picking and prodding and gave a yank upwards with pliers - popped straight out.

Photo below shows what holds it in. There’s really no way to release this other than just pulling it up to release.

 

[Tony Dyson]

Waaaahooooooo...

 

[Blobcat]

Ok, done

thanks for all the suggestions.

Gave up picking and prodding and gave a yank upwards with pliers - popped straight out.

Photo below shows what holds it in. There’s really no way to release this other than just pulling it up to release.

View attachment 62158

Might be able to get a small flat bladed screwdriver in there - now you know it’s there...