Search results

I did but still no further forward on the answer I appreciate not everyone would know what is missing and just hoping someone would know the answer before being held at the mercy of a garage with someone going 'Oooooooh!!!!!' :)

Matt no the car is not my actual vehicle, the part I am looking for would be the part from the wheel arch to the ecu which is completely missing so currently no wheel sensor on at the moment hence no abs or run flat indicator if that helps? So I need to know what to search for as a replacement...

Mmmm looked several times and do not see the name of the a fore said connection cable or where it actually plugs into unless I have misread it?

The picture hopefully explains what I think is missing!! speed sensor connection to ecu?

Yes that is correct

Very well spotted, however we are talking about the missing link/cable to I assume somewhere in engine bay/ fuse box or where ever it might hide away ;)

Right so it is the fronts and the part missing is the section attached to the arch in the picture which I assume goes to somewhere in the engine bay

No the part from sensor cable to engine

Not sure how to describe this..................I assume there is a cable from engine compartment that drops down through the inner wheel arch to attach the speed/wear sensor cable to? This has been removed as the previous owner couldn't be a**ed to fix discs and pads!! So I need to know what...

I am trying to find rear shock absorbers for my CLK with the AMG sport pack but all the usual sites do not seem to list suitable parts or are a bit sketchy as to whether they fit!! Anyone have any idea of the best place without having to take out another mortgage :(:eek:

Hi so change bulb, lock car then try pedal again?

Hi My near side brake light has stopped working so I replaced the bulb but no joy!! I appreciate it won't be a fuse but not sure where to start diagnosing

I tried that first but thinking the blockage must be in the pipe

On my CLK it has a grill for the washers on the bonnet, I have a probably blocked nozzle on one side, I have removed the 3 hex type screws but not sure what else needs to be done as I am sure there must be some sort of clips holding it in place but don't want to force it in case I break them...

No still no joy at the moment

I know the abs sensor is also the speed sensor which is why I am getting the code, and from what you have said the module for the near side front wheel has been removed and then the system reset, but I also think where you would normally plug the sensor in has also been stripped out as there is...

I will see if I have time to remove wheel and post a pic or 2

yes i do understand that but I think the previous owner took sensor out due to the poor condition of the discs and pads, so what I need to know is how to put it back in, it looks like the link form the sensor cable to the module has been removed as well

Only since replacing the front discs and pads