Search results

Yes, im in Coventry. Send me a message

Just did this on mine (2016), both had failed but was in fact due to corrosion on the terminals on the car side. All you need to do is pop out the led lens out using a flat screwdriver and either replace the whole unit (led is attached to the lens) or use a small file to clean up the terminals.

Yes, it will be the same problem, its quite common and i've changed a few now on other customers cars. You need to get it on STAR diagnostics to check the actual values of the paddles. i dont have any instructions but its a steering column strip down, air bag, steering wheel off etc. I can do...

Hi, sorry just see this, that is the correct part number you have (A 033 545 62 32). Best to just keep looking out on ebay. They are £300 new from the dealer

send me your vin and i can pull the digital record for you

pm me your vin, i can send you the part number. Ive changed a few of these modules now on other cars, they control a lot of items on the column

Hi Michael, Im in Coventry myself

shame you are not closer to me, i fix quite of few of these red battery warning issues. Its either: F52f1 F52f2 F32 F33 K57 Relay K75 Relay or finally N82/1 module You need to have star diagnostics with you to go through each component to test. I have changed a few BCM units with no visible...

Its very common for the spring clip to break and yes it fits on the right side of the boot behind the drivers tail light

They are a straight swap on all R230's. Have done a few upgrades before

Hi Ade, Yes i still do. Ill send you a message. Regards

You need to call your dealer if you want parts from them. I have a trade account, do you know what part numbers you require?

Hi Norman, Sure i will message you.

Hi Dave, Yes i do, i will send you a PM.

Hello and welcome, Love the mods. Is the W205 steering wheel pug in and play, do all the buttons still work? Also do you have any details on the android head unit please? Wouldn't mind one in mine :)

BenzTronic in Coventry https://www.instagram.com/benztronic/?hl=en

why not replace just the lower ball joint, they press in and out. They are however pricey and might not be economical on a non ABC car. Ive done a couple myself due to the same noise you are talking about.

Hi, part number is correct and your dealer is right they are no longer available. who told you need one? are you having suspension height issues? Ive never known one to fail. If you do really need one, just make a new one with two ball joints and some threaded bar. Similar to lowering links.

on the dip stick are you filling the oil to the max?

I always fill around 6-7L and incrementally fill it half a litre at a time while checking the dipstick. Just take more out and use the dipstick as the guide. The message you are getting is because there is either too much or too less oil in the engine. Obviously you have too much as the...