Search results

Thanks for the fuse box diagram but do you know which relay is for the indicators as it doesnt say on the key.

Hi could someone tell me which relay in the fuse box is for the indicator flashers . Car is a 2013 slk250D Indicators work for about 5 minutes while driving then stop. They only stop working if the car is being driven . tried leaving the flashers on whilst parked and they dont go off. If I...

I have recently replaced the water pump on my 2013 slk250d .After putting it back together I noticed an electrical connector with the wires pulled out on the garage floor . Now my indicators seem to be cutting out when the auto headlights come on. The hazards are working fine. When I stop the...

Thanks alexanderfoti for the info. :) All good.

I have just replaced my water pump on a 2013 SLK 250 d and all seems ok. But I have noticed a pump running sound keeps going after I have stopped the engine. It seems to be coming from a round topped component next to the header tank. Could some one tell me what this item is . It appears to be...

Thanks Blobcat that is a relief .Had visions of having to drill and re tap calliper.

Just been replacing front discs and pads on a 2013 SLK 250 D and managed to snap name plate covers on callipers. They seem to have welded themselves into the calliper and when i tried to prise them out one stud snapped in and the other pulled out of the alloy cover damaging it. Do they provide...

ok thanks might leave it in service mode till i have bled them,

I have just changed the discs and pads front and rear on my 2013 SLK 250d and am going to change brake fluid. Should I leave the electric parking brake in service mode while bleeding brakes or does it not matter. ? Thanks for any info.

Thanks for your replies.

Hi I am having trouble getting hold of a right rear parking brake actuator for a 2013 SLK 250 D. I have found plenty for other models such as the W176 A class but not the SLK R172. Can anyone confirm whether the A Class actuators will fit the SLK. I have compared pictures to mine and they...

Thanks for all your comments .I think ill just stick to the original style discs and replace both sensors as well if they are on both wheels.

Got a brake pad wear warning light on this week. There is a lip on my front discs and I am thinking of replacing these at the same time as the pads. Is there any advantage in upgrading to drilled discs or should I just replace with the same plain vented. Can anyone tell me wether there is 1 or 2...

not sure about the sensor but when it stops it doesnt work on any setting.

Sorry for the delay . intermittent on any fan setting . i cleaned the sensor before replacing it and it hasnt done it since. but im sure it will sooner or later. now i know what it looks like am gonna replace with new next time .

hi yes i removed it from under the glove box passenger side and the piece is exactly like the first picture with a heat sink on it, thanks.

Hello am looking for some info on my heater fan model w204 c250 2010. fan is working intermittently. i have read its probably the heater blower motor resistor. i have removed what i think is the part from under the dash pic 1 but have also found another part advertised as the heater fan blower...

I got the new alloy one from my local motorfactors but bought the previous steel ones from euro car parts.

Hi got a replacement front drop link for my w204 c250 elegance but doesn't seem to match the one that came off new one is alloy and old one steel. they both say the are correct for my car but going to have to change one to match. Is there a diffrence between alloy or steel if so which is the...

HI can anyone suggest a hand held scanner for removing airbag lights on a w204. has anyone tried an icarsoft i980. heard that one will . Thanks.