Search results

Looking at changing my glow plugs, which make would you guys recommend

Fitted a new condenser, aircon running great now

This is what the problem was

After replacing bulb and starter the only part left was the ballast unit so for £26 I gave it a go rather than paying £80 for a star check

Update, issue resolved it was the ballast unit, removed inner wheel arch cover to gain access to it rather than taking the front bumper off, took about 45min to do.

Come on folks, someone must have an idea what’s wrong please

Did u manage to get it fixed as I have the same issues

Drivers side Headlight bulb not working so replace buld D2s and starter still not working, have checked fuse 66 7.5amp and thatS fine, any ideas what else it could be please. 320cdi 2006

Update on car, sensor rings replaced, but then they found both rear springs had broken so had them replaced, all is ok now apart from my wallet which is £568 shorter

Just as I thought it’s the wheels sensor rings, been quoted £293 to replace them both

car goes into garage tomorrow, so will let you know how it goes, I’m hoping it’s not the wheel sensor rings as I don’t fancy changing them in this cold weather.

I bought a bosch sensor, don’t see why it has to be genuine MB one, can understand if it’s a cheap unbranded one.

Mercedes cls 320 cdi 2006 I have a fault showing my abs, the fault that came up on my icarsoft was the right hand side rear speed sensor, so I replaced it and cleared codes, but fault has come back say left hand rear side now, took a live reading and both speed sensors have no value. is there...

I also remember how easy it was on cars made years ago but sadly engineers nowadays don’t think of easy access to parts, the bolts for this anti roll bar are in a very awkward position and cannot get access to them, but thanks for your reply.

Haynes doesn’t do a manual for this car

Looks nothing like the access you have on a CLS, that’s why I’m asking if any CLS owners have done this work.

Has anyone done this on a cls

CLS 320cdi W219 2006

I have new bushes, just wanted to know whats involved to replace them, is it a straight forward job