Search results

Hi bigasotonuk, Thanks for the reply, sorry for the delay I've been having a look on the car. The airbag isn't in the door as I have recently changed the speakers and sound deaden it all so I had my hand right up inside the door and could see or feel a airbag unit, unless its very small. It...

Hi all, I have a 2004 CLK55 convertible and I'm getting the SRS warning light when someone sits in the passenger seat so im assuming its the sensor mat. I have seen the emulators that bypass it and stop the fasten seatbelt light. The problem is then that these emulators stop the seatbelt pusher...

My original ones looked like this. I have a A209 though. Did have to file the rads off the corners on the door trim to get them to fit as they were tight

I just upgraded mine to projector lights. You are right the original ones give no light. £8 off ebay for two.

Ill give that another check tonight. I have changed the plug and the old plug didnt seem to have any oil on it but worth another look. Thanks.

Ive had a good look on the web and there are a lot of other forums saying it. What else would cause a leak at the back of the engine?

The leak was there before which is why i changed the gaskets as I thought it may have been running down from the pool on top of the bell housing. I took it out Sunday after I had completed all the work and cleaned it all but its still dripping. Theres no oil at the front of the engine so im...

Hi all, I have an oil leak im hoping someone can help me diagnose. The leak appears to be coming from between the engine and clutch case (as seen in video). There also appears to be what looks like air bubbles coming from the same area. The leak may not be there and it is just finding the...

Hi all, I recently done a transmission fluid change on my 722.6 gearbox. At the time i wasnt aware the TC had its own drain plug. I changed the fluid by taking the sump off and i did wonder why it only took 4.5 litres, now i know. My question is does the TC have its own fill plug? Is it...

Thanks, I appreciate the help. Ill try it Saturday and let you know if it works. I disconnected the battery when i fitted the Android and i remember the clock spinning around when i reconnected it so i think it will work.

Maybe its because i have the AMG clock, it may work differently. There is definately no option to set the clock in the dash menu, i have had a good look through it all. It isnt even mentioned in the user manual as i guess the COMAND system set the clock automatically by GPS.

Hi Dave, Unfortunately the time setting is not available. As I had the COMAND system the clock was set via the headunit so its not in the menu on the dashboard. i will have to have the car re-programmed on a STAR to recognise it as the Audio 20 system, then the menu will appear.

Thanks for your replies. Ill try disconnecting the battery at midday and let you know if it works. The clock on the Android unit is correct but it is very small so if i can get the big one on the dash working easily it will be worth it.

Apreciate the offer and the reply but thats a bit of a drive for me. Will the clock reset to 12 o'clock if i disconnect the battery? I can just wait until noon and reconnect the battery.

Hi, I have removed my COMAND system and replaced it with an Android system. The problem now is the clock on the dash is wrong and there is no option to change it in the menu as it syncs with the COMAND. Does anyone know of another way to change the clock on the dash? Thanks Mark

Is there a way to type the error code in to the WIS/ASRA?

Ok so its been a while but I finally have an update. I contacted iCarsoft and told them I couldn't connect to the RVC module. They have now come back to me with new software and I can now connect. I read the fault codes and there wasn't any so I opened the roof and it stopped. The error code I...

Thanks. Ill have a look for it when I get home. I cant remember seeing that though.

I'm trying to stay away from breakers as the car is old so all the parts I get will probably have limited life. The CAT is easy to get in a weld on style. Milltek, Jetex and Magnaflow do them, although I think Magnaflow is American but there are UK distributors so as long as they are EURO...

The iCarsoft CR Pro can do live data streams but you have to select the module you want it to monitor. When you do a diagnosis you have to go into each module individually and read the codes, its not intelligent enough to go through it for you and just pull the error codes from each module. I...