Search results

believe that it can be a donor. there are 3 different ones, 2 are in the rail and one is on the pump. They are quite expensive so you do not want to chance. is there anything you can check so i see if it fails?

they are bought from an injector shop. think it goes better and better before I went home it barely smoked! but think it is bad fuel pressure. shows a video where you see bad pressure. Has test same computer with a vito and it holds 240bar all the time! anyone know where the computer is...

now i have been running it for a few minutes and got error code p063. which means it malfunctions on cylinder 1. has also had a similar code fixed for cylinders 3 and 2. but it's because it doesn't run on all cylinders i guess? Its smokes much and White!

Thanks for answer. I har delphi diagnosic computer and its no fault codes only that fuel pressure has come low when you have been running it for a while, which I understand as it runs on a little gas and nothing more.

hello have a Mercedes b180 2012 with the om651 engine. The car has worked perfectly in the future that we would change tensions to the chain. After this the car did not start. assumed that the injectors have become defective due to strange fuel pressure, bought new ones and now it starts but...

Any ideas? I'll do a leakdown test with the starter how much is okay?

Hi thanks for reply! I have used delphi computer. The car went perfectly before but rattled by the tensioner. The car has gone far 40.0000km I hear that the pump is working in the tank, stands on the computer about 4bar thank you for answering!

Inga idéer?

Hey has a b180 cdi with om651 engine. The problem arose after the tensioner for the chain had to be replaced and after that it did not want to start. Check and it is still good in markings. no error codes has found I have found a problem and it is that the fuel pressure is 270bar when you...