egr

  1. M

    w209 320 Petrol - stalling issue

    Hi all, I got a 2002 CLK320 and it has an issue with stalling when starting cold. It also sporadically stalled driving on the motorway with the same symptoms. The engine starts but it dies off when started from cold and being unused for a day or two. After repeated trials (3 up to 15...
  2. silestanix

    EGR delete - W202 C250TD - Quick Question

    Good morning all. Having read through Dieselman's egr delete thread thoroughly I am going to carry out the EGR Delete mod on my C250TD this morning by using a ball bearing to block the vacuum hose. If anything just as a trial to see how the car behaves over my journey to and from work today...
  3. S

    C270CDi: EGR disconnected; could Limp Mode be useful?

    Hi All Although I've been reading these forums for about 2 years, this is my first post. (I have another in mind: to put together ALL the info I've gathered on using the 5g gearbox. Because I wish I could have found all the info in one place). I've learned so much!!! Thanks, guys. eg: I...
  4. A

    EGR disabling MB engine (Jeep GC 2006)

    Hello, My problem is as follows. I know my way around a soldering station. I know computers but knowledge about engines and their inner workings is not my strong side. So guys at the workshop disabled my EGR with plugs, but ECU gets error signal when I use full throttle and then disables...
  5. Z

    Garrett turbo, limp mode

    I am still trying to troubleshoot my limp mode. I started by cleaning the EGR valve. When I took it off, I found a 5-7 sq.cm piece of black plastic which looked like it broke off something. I could not find it's origin, but I saw plenty of gunk in the manifold. Anyway, I started by cleaning the...
  6. Z

    W210 CDI 220 won't start after manifold clean

    I have had a limp mode problem with my recently purchased car. Searching the forum I saw it is a common problem, and is often related to EGR valve. I took it off to clean it, and saw the manifold is packed with black gunk. So I decided to clean it as well. During the disassembly I took off the...
  7. S

    w209 cdi 220 where does the egr vac pipe go to?

    hi just wondering if anyone can tell me where the vac pipe off the egr valve switch/actuator goes its conected at the egr end but it is hanging loose at the other i dont know if someone has done this on purpose or dislodged it i just dont know where it goes please help?also car hesitates...
  8. O

    S320 CDI Throttle Actuator Unit????????????

    Hi Guys, I've been having ongoing issues with my S320 CDI. It hessitatates between 1400-2000rpm and shudders a bit also. My local independant specialist diagnosed it as the EGR vavle over purging but claimed that it wasn't faulty, he said something else was causing it to open to often...
  9. duncanh

    How do I clean my EGR?

    Anybody got a "how to" for checking/cleaning the EGR on a 2002 c220 cdi? There appears to be a lot of threads where the answer is "clean the EGR". I cannot find one that gives me enough confidence to tackle the job. I believe that I may need to clean mine, power is down, fuel consumption...
  10. E

    Mecredes A Class CDI "2000" EGR breather pipe

    hi silly question but does anyone know where the EGR breather pipe originates from? Garage changed clutch and havent put it back on - I cant see it so wanted to trace it from where it starts..... help!:shock:

You lost your key ? Or maybe you need a spare! Your vehicle imobilliser does not respond anymore? WE CAN FIX THEM ALL !! Mobile ! Save Time and Increase Profits With us !
Top Bottom