124 E280 resonance valve connections

stumpy

Senior Member
Joined
Jul 29, 2006
Messages
1,611
Reaction score
2
Your Mercedes
various
Had a fast idle for a few days so did the following. Took the cover off the resonance valve sitting in the intake m/fold and freed off the gubbins inside. Problem is, at the back of the valve body there is a port with a tapered rubber connector on it, and the rubber has hardened and split. There also doesn't seem to be anything connected to the other end of the rubber connector. I have looked on the russian site and this area is not shown in any great detail. I need to get a new connector from MB, but is there anything that should go on to it? The idle sits at 650 now which is fine, but the car does hesitate a bit under full bore acceleration which does point to a vacuum problem somewhere. Any pointers gratefully recv'd.
 

Stop looking for the Best Garage!! We are here and have the best advanced solutions for you, at Competitive prices. Put us to test with any issue you may have.
Top Bottom