190 Rear brake disks

[Rpmayne]

Just a quick question. I am ordering some new rear disks and just wondering whether the bearings fit into the disk. If so I thought it would be easier to buy some new ones at the same time, rather than trying to re-use the old ones.

Thanks.

 

[sunil sood]

as far as i am aware the rear brake discs are separate from where the wheel bearings fit :lol: :lol: .

 

[mike65]

The brake disk has a hole in the middle through which the wheel hub goes, and the bearings are in the hub therefore there is no connection between the two.

Mike.

 

[grober]

Be prepared for some heavy duty disc+drum removal if its corroded onto the axle hub!! Sometimes they will come of easy , but you might have to resort to a puller or 5lb hammer tactics The inner hub of the rear disc itself functions as a small drum brake for the handbrake so make sure the handbrake is off befor removing the disc/drum assembly from the axle hub :? . there may also be a small allen screw to remove also. good luck.