Answers FArom The Oil Expert Part # 2

oilman

Forum Supporter
Authorised Forum Supporter
Joined
Aug 13, 2004
Messages
699
Reaction score
46
Location
Sunny Cornwall
Website
www.opieoils.co.uk
Your Mercedes
clk 2008
Answers From The Oil Expert Part # 2

Hello all,

As a follow on from our last post on questions and answers from John Rowland we now have part 2 for those that crave more “oily knowledge”.

As before some of these topics have been covered but we feel worth the read.

Some oil companies have run advertising campaigns that imply their products have special, unique qualities. Can these adverts be taken seriously?

Yes and no! Generally adverts in magazines are honest, with marketing-speak terms such as ‘Magnatec’ and ‘Electrosyntec’ really being code words for esters, which are particularly beneficial in performance engine oils. No manufacturer has any unique ‘secret’, so it’s all down to providing the best possible blend for the job at the right price, and making it clear that you get what you pay for. I personally think that the importance of shear stability or ‘stay in grade’ is not stressed enough when quality is talked about.

What is dodgy though is claiming that a mineral based oil with a few percent of modified mineral (‘hydrocracked’) synthetic is the DB’s and suitable for racing, etc. when it clearly isn’t.

Also, there is endless semantic manoeuvring and lawyer-speak around The Magic Word ’synthetic’.

For instance, a ‘synthetic’ oil is invariably semi-synthetic (’Ah! We didn’t say it was all synthetic did we?), and, if low priced, invariably the modified mineral type synthetic. It is a sad fact that you get what you pay for, but even so, stick to the reputable UK/European brands, and remember that shipping an oil half way around the world doesn’t automatically make it better than one made in your home town.

As for TV advertising…well, does anybody believe it? Due to its huge cost, a TV advertising campaign can significantly raise the cost of specialist items such as oil. Everybody assumes it’s just a few pence per gallon, but it can be pounds per gallon.)



Please can you explain the grading system? What is meant by the weight of an oil? What does 10W/40 mean for example?

Weight means viscosity, or resistance to flow. Water and paraffin flow very easily, so they are low or light viscosity. Golden syrup or 140 gear oil do not come out of the can so easily, so they are high or heavy viscosity.

Especially with oils, temperature is very, very important. An oil which looks ‘heavy’ at 20C will be very ‘light’ at 100C. People sometimes say, ‘I drained the oil when the engine was hot and it ran out like water…’ so I say, ‘Good! It’s supposed to be like that!’

The American Society of Automotive Engineers (SAE) ratings cover cold starts and ‘up and running’ viscosities. There are two sets of standards, the ‘Winter’ (W) ratings, and the 100C standard ratings. (‘W’ does not, repeat not, mean ‘weight’!)

So a 10W/40 oil has to pass a 10W cold viscosity test at -25C, and a SAE 40 test at 100C. In an oil lab there will be a refrigerated viscosity measuring device for the ‘W’ tests and another at 100C for the standard SAE tests. There are 6 ‘W’ ratings from the difficult 0W at -35C to the dead easy 25W at -10C, occasionally used in India for example!

The whole point of these Winter ratings is to assist cold starts, to get the oil circulating quickly, and to avoid power and fuel wasting drag as the engine warms up. Once it is warmed up, the 100C ratings count. There are 5 of these, 20, 30, 40, 50, and 60 although why anybody bothers with 60 in the 21st Century is a mystery to me!

Sorry folks, but I’ve got to get technical. Viscosity is measured in standard units called ‘Centistokes’, names after a Victorian engineer, Sir George Stokes, who used to time ball bearings as they sank through oil. SAE 30 for example is from 9.3 to 12.5 Centistokes, and SAE 40 follows on at 12.5 to 16.3, although most SAE 40 oils are in the middle at about 14.

Now this is something most don’t realise: engines do not know what grade of oil they’re running on. They’re not clever enough! So an engine filled with 10W/40 will be running on a viscosity of 14 at 100C, but with a sump temperature of 90C its seeing a viscosity of 18, so as far as the engine is concerned it’s running on SAE 50. Likewise, at 110C, it’s down to 11 Centistokes so it ‘thinks’ it’s on a SAE 30! (Which is preferable.)

The lesson is, do not use power and fuel-wasting thick oils in cool climates. A decent 10W/40 or even thinner is perfectly OK unless you’re running a classic with wide clearances and a slow oil pump.
 
Last edited by a moderator:
OP
O

oilman

Forum Supporter
Authorised Forum Supporter
Joined
Aug 13, 2004
Messages
699
Reaction score
46
Location
Sunny Cornwall
Website
www.opieoils.co.uk
Your Mercedes
clk 2008
  • Thread Starter
  • Thread starter
  • #2
Radical race cars use 1300 Suzuki Hyabusas and work them very hard. (Didn’t one take the old Nurburgring absolute record at one point?). They use our high-ester 15W/50, but that’s OK because they see oil temps around 130C! (No problem for the oil or the engine, but they do fit special oil seals.) At 130C the true viscosity is 10cSt, so the engine thinks its on a thin SAE 30, which keeps it happy.



What is the best type of oil to use in a road car for general use? Is fully synthetic a waste of money?

Personally I’d go for a shear-stable part ester synthetic, SAE 10W/40 or 5W/40. The ‘shear-stable’ bit (ie, a decent quality multigrade polymer) is actually more important than the ‘synthetic’ part!

If strapped, I’d go for a shear-stable mineral based oil rather than a ‘synthetic’ of dubious stability that’s probably based on modified mineral oil anyway. Unless you’re covering a huge annual mileage, genuine 100% synthetics are probably an extravagance. High mileage long-distance fans can use a light full synthetic and save on fuel and oil changes, and cut overhaul costs if things get to that stage, but more later…..




What are the main differences between 2 and 4-stroke oil? Why does 2-stroke oil have to be mixed with fuel?


2-stroke oil has a very short working life, straight in and out, and it gets burnt. The 2-stroke engine doesn’t have a sump full of oil and the bearings are all rollers, so there’s hardly any oil drag, hence no need for multigrades. Long term stability is obviously not a problem!

But, 2-stroke must burn off without leaving any plug-fouling or detonation-initiating deposits. The detergent and anti-wear additives used in 4-stroke oil leave hard white ash behind when they burn, just what you do not need in a 2-stroke. So 2-stroke oils use low-ash detergents and dispersants, and the better types use ester synthetics to act as anti-wear compounds.

With current environmental concerns, smoke is a sensitive issue, so most ‘road’ 2-stroke oils are now low smoke, which requires yet another type of synthetic base designed to burn off invisibly. For some rather basic but very high-revving air-cooled racing 2-strokes there’s still some sense in using blends with that marvellous anti-seize liquid, castor oil!

Due to crankcase induction and compression, the classical 2-stroke obviously cannot have an oil-filled sump, so the only way to keep an oil film on anything was to add oil to the fuel, or inject oil into the crankcase space where it could mix with the fuel vapour. There are now some engines where the fuel and oil are injected separately, but the oil is still burnt.



How important is it to change oil regularly? What are the implications of failing to do so?

It is only really important to change oil regularly if the engine covers a low annual mileage made up of slow, short runs. This is being cruel to the oil and the engine! The oil, regardless of its quality, gets full of fuel and water vapour, and never gets the chance to evaporate it all off with a long fast run. The consequences are corrosion, ring and bore wear. It is essential to do a change at least once a year, even if the recommended mileage hasn’t been covered. On the other hand, if you eat up the miles on long blasts the engine and its oil will love it, so with a top-quality oil it is OK to cheat a little on oil drain periods.


Do some types of oil (i.e. fully-synthetic) ‘wear out’ quicker than others? How important are timely oil changes? Can you rely on the frequency suggested by your User Manual?


The type of oil that is likely to give trouble after low mileage is a light viscosity type with poor shear stability, either mineral or modified mineral based. (Such as one of the USA ‘fuel economy’ oils for lazy car engines that pushed the Japanese OEMs to bring in their own oil spec.) The important thing is the shear stability; the much hyped ‘synthetic or mineral’ nonsense is a red herring.

The oils that will last the longest are the relatively rare 100% genuine synthetic shear stable types, which will easily stand twice the recommended drain period in a high-mileage high performance engine. (So in the long run they aren’t really so expensive.) Just the thing for those touring fiends who pack up and set of for the Transylvanian Alps as soon as the clocks go forward!

Of course, User Manual drain recommendations are based on a back-covering ‘worst case’ scenario of low annual mileage on poor quality oil, so they can be regarded as a very safe minimum mileage.

In the past, there used to be trouble with heavy carbon deposits and sludge around the engine with early low-detergent oils, but these days almost any oil with a good API specification will keep everything clean for 10 to 15,000 miles, so that’s the least of your worries.


Does oil have to be warm to do its job properly? Is it important to warm up your engine before using at speed?


Yes, it does have to be at least warm, and preferably hot. Most people except the sort with white finger syndrome find metal at 60C too hot to touch, yet 60C is too cold for oil in an engine that’s going flat-out. The best approach is to use a good 5W/40 or even a 10W/40, and take it easy for the first couple of miles, especially in very cold weather.
 
Last edited by a moderator:
OP
O

oilman

Forum Supporter
Authorised Forum Supporter
Joined
Aug 13, 2004
Messages
699
Reaction score
46
Location
Sunny Cornwall
Website
www.opieoils.co.uk
Your Mercedes
clk 2008
  • Thread Starter
  • Thread starter
  • #3
For racing, a really good warm-up is essential, except perhaps with special 0W/20 low-drag race oils. The trouble is, oil pumps are very good at pushing oil out at 60PSI, but unfortunately there is only 14PSI (atmospheric pressure) pushing it in! (Even less in Katmandhu.) So it’s easy for an oil pump to pull voids or pockets of vacuum in the oil if it doesn’t flow fast enough into to uptake. This ‘cavitation’ obviously reduces the amount of oil the pump can deliver.

Also, in high-speed bearings the oil can be too thick to keep up with the high rubbing speeds reached in modern engines so the ‘wedge’ or hydrodynamic’ effect breaks down. I know it goes against common sense (whatever that is) but the faster a bearing is turning the thinner the oil should be. (A 4cm. diameter main bearing is rubbing its shells at 56 MPH at 12,000RPM! To avoid cavitation the oil need to be less 10cSt or less, which is SAE 30 if the oil happens to be at 100C, or SAE 40 if its at 110C.))



What is the difference between road and racing oils?

The days of incense-like ‘R’ oils for racing only are past, except for classics. At least as far as 4-strokes are concerned, the best synthetic types are ideal for both race and road use.

With ultra-precise components, high-pressure pumps and high engine RPM there has been a move to special synthetic low cavitation/low drag oils to release more power with no reliability loss. These can be (and are!) used in road cars, but 0W/20 is not mentioned in the user handbooks, so there is always some warranty risk. Honda is perhaps the only exception!


How does a high-performance oil allow the motor to produce more power?


An engine wastes fuel energy in several ways, and most of them are due to the laws of thermodynamics, which is another way of saying you can’t do much about it. But up to 6% of engine output is lost due to oil drag, made up of pumping losses and viscous drag between moving components. The transmission is included in this.

Provided wear and friction are kept down, there are real gains to be made by using a ‘tough’ but low viscosity oil. Surprisingly, frictional losses are low, down at 3% or less even with conventional oils, so there are few gains to be made here.

I have actually seen this extra power output on the dyno! A very experienced operator in Peterborough who does a lot of test work for Lord Emap used his own year-old Honda Blackbird, with the first run on his favourite 15W/50 high-ester synthetic. 128BHP. Then we changed to a 5W40 high ester synthetic. (So it wasn’t an unfair comparison with B & Q 15W/50!) This time we saw 131.6BHP with a corresponding torque increase. Finally we went to a new (at that time) 0W/20 special synthetic and 134.4BHP appeared! Even the boss was impressed! Later trials in different race and road engines showed this level of improvement was no fluke, so it really does work; and, with the right chemistry to look after the engine and transmission internals, there’s no down side of increased wear.


Why do some engines consume oil? Is this a problem?

Large air-cooled engines or classics with wide piston clearances, or very highly stressed liquid-cooled engines which flex under load, or which use ultra-light pistons with the minimum number of rings are likely to be oil users. There is little that can be done about it. Unfortunately, burnt oil tends to leave hard deposits in the combustion chambers which can initiate pre-ignition, so more frequent top overhauls are usually necessary.

Occasionally, touring engines will use oil for no apparent reason. This is often due to the oil level rising in the crankcase due to air retention, leading to oil loss through the breather. The answer is to move to a lighter grade of oil to improve air release.


If you need to top up your engine oil, how important is it to use exactly the same brand and type?

Not very important at all. Unfortunately, due to ‘arse covering’ reasons we cannot print this advice on the can! Although officially all manufacturers advise against mixing different makes and grades, in fact there is very little chance of any harm being done, even if one is a mineral 20W/50 and the other is a 5W/30 synthetic. Obviously, avoid this if you can, but do not panic if there’s no other alternative. Just don’t mix 2 stroke and 4-stroke oil!


There are all sorts of additives available which are supposed to improve ordinary oil and reduce friction, improve power output etc. Are they worth a try?

Oil is already a very advanced and deeply researched fluid which does not need any ‘enhancement’. There is no secret formula out in the backwoods that the mainstream lubricant chemists do not know about; but there are plenty of half-baked ideas and gullible people out there!
These wonder additives are usually 1930s chlorinated paraffins, long obsolete gear oil additives which should have disappeared in the 1950s, but they keep turning up as ‘Xxtrasuperlube ZX3’ with a mark-up of several thousand percent. They actually corrode engine and transmission internals, so they do far more harm than good.

Others depend upon the total myth that PTFE powder coats engine internals and reduces friction. It doesn’t do anything or the sort. It just blocks the oil filter. The AA tested one of these overpriced PTFE concoctions (‘Quick 60’ or something) very thoroughly back in the 80s. They stated: ‘This is an expensive way of coating your oil filter’.

So there we have it, would just like to thank once again John Rowland (R&D Chemist) for taking the time to provide these answers to questions that we are frequently asked.

If you have any further questions, please ask.

Cheers

Guy and the opieoils.co.uk team.

PS. All New Opie Oils website coming soon!
 
Last edited by a moderator:

oldcro

Senior Member
Joined
Jul 9, 2007
Messages
135
Reaction score
0
Location
Shetland
Your Mercedes
Range Rover Westminster
An excellent and informative read.

Many thanks.
 

FIBAMAN

Senior Member
Joined
Nov 13, 2006
Messages
343
Reaction score
1
Location
TYNESIDE
Your Mercedes
C180,C180,E300TURBO DIESEL
Excellent info, and very well presented so all of us can understand. Thanks very much and I expect that you will save money for more than just a few of us.
 

television

Always remembered RIP
Joined
Mar 14, 2005
Messages
164,073
Reaction score
367
Age
89
Location
Daventry
Your Mercedes
2002 SL500, 216 CL500, all fully loaded
Thank you again for the excellent article
 

anyweb

Senior Member
Joined
Jul 15, 2005
Messages
3,147
Reaction score
362
Age
57
Location
Sweden
Website
www.niallbrady.com
Your Mercedes
c238,w120 (diesel)
superb post oilman

I read it all, very interesting.

i'll pin it now !

cheers
anyweb
 

may2350

New Member
Joined
Jul 17, 2007
Messages
9
Reaction score
0
A very intresting read. How does the engine computer work out when the oil needs changing?. what information does it need to do it ? can it be trusted
 
OP
O

oilman

Forum Supporter
Authorised Forum Supporter
Joined
Aug 13, 2004
Messages
699
Reaction score
46
Location
Sunny Cornwall
Website
www.opieoils.co.uk
Your Mercedes
clk 2008
  • Thread Starter
  • Thread starter
  • #9
I believe its worked out over time and how the car is used.

So, if the car does lots of short stop, start journeys from cold then the computer is likely to want a service in less mileage and time then if the car was used for long distance motorway cruising, which oil likes.

Can it be trusted... who knows but the coreect long life oils can go the distance.

Cheers

Guy.
 

dougjoy

Senior Member
Joined
Dec 2, 2007
Messages
123
Reaction score
0
Location
Canterbury
Your Mercedes
Mercedes Benz S320CDI
Excellent read and very informative, one question, does having a oil cooled turbo decrease the mileage between changes due to the heat ?
 
OP
O

oilman

Forum Supporter
Authorised Forum Supporter
Joined
Aug 13, 2004
Messages
699
Reaction score
46
Location
Sunny Cornwall
Website
www.opieoils.co.uk
Your Mercedes
clk 2008
  • Thread Starter
  • Thread starter
  • #12
Yes and no, all depends on what kind of oil it is, and of course how hard the turbo is used.

Cheers

Guy.
 

dougjoy

Senior Member
Joined
Dec 2, 2007
Messages
123
Reaction score
0
Location
Canterbury
Your Mercedes
Mercedes Benz S320CDI
I do long high speed runs from Canterbury to Glasgow 7 - 8 hours 479 miles, door to door at least once a month, 6 times over the last month and have been using Mobile Super S 10-40 semi synthetic and changing every 6K miles. I have just bought Mobile 1 0-40 fully synthetic. Would it be OK in the turbo deisel and would 10K between changes be feasable?

Your opinion would be appreciated and taken only as advice.

I felt you needed a getout clause just in case I blow it up using the wrong oil.
 
OP
O

oilman

Forum Supporter
Authorised Forum Supporter
Joined
Aug 13, 2004
Messages
699
Reaction score
46
Location
Sunny Cornwall
Website
www.opieoils.co.uk
Your Mercedes
clk 2008
  • Thread Starter
  • Thread starter
  • #14
What Mercedes do you have?

Mobil 1 0w-40 is a good quality oil and meets good MB specs so no problemd using it at the service interval of 10,000 miles.

Ideal.

Guy.
 

dougjoy

Senior Member
Joined
Dec 2, 2007
Messages
123
Reaction score
0
Location
Canterbury
Your Mercedes
Mercedes Benz S320CDI
Guy, thanks for the reply I'll change it this weekend. I have a W210 E300 TD 1999, with almost 125K on the clock, Ive owned it for 5 or so years, bought it to do lots of miles, I was living in Canterbury and working in Stanstead. I had a BMW 530D under a year old and didn't want to rack up the miles on it, so the Merc was perfect.

What went wrong was that I fell in love with the car, it just kept surprising me, and still does. I don't know what it is, but I still love looking at her and keeping her looking her best and running her best.
Last year I looked at the 211 320CDI and nearly traded her in but just could not do it. So I thing I've got her for life, mine or hers, whichever comes first.

Thanks again for the info, greatly appreciated.
 

MarkCL

Senior Member
Joined
Nov 25, 2006
Messages
308
Reaction score
1
Location
Hampshire
Your Mercedes
W211 E320 CDi Avantgarde
Hi Guy - nice to see that your excellent help is available on here as well as other forums :) Since you were able to help out with my questions on my GT-Four on the GT4DC and OC forums I was wondering if you could make some reccomendations for my new car?

I have a 1999 AMG C43 thats coming up for it's 100k mile service in about 5k miles now and I want to make sure that I put some decent replacement fluids in there when things like the g'box fluid is changed, diff oil etc - so based on that:

a) What would be the best oil to be putting in the g'box? Best to stick with Merc's reccomendations or is there something better that I can work with?

b) Same question, but relating to the rear differential?

c) Last one - I bought some of that great Silkolene fully synth (Pro R 15W-50) for my GT-Four before and its been great - can I use the same in the AMG? Since it's another high power engine I want to make sure that I'm giving it as much help/the best oil I can use to ensure it's long & healthy life :)

Thanks in advance for any help!
Mark
 

dougjoy

Senior Member
Joined
Dec 2, 2007
Messages
123
Reaction score
0
Location
Canterbury
Your Mercedes
Mercedes Benz S320CDI
Hi Oilman, replaced oil and filter yesterday and the difference was immediate. The engine noise level has quartered at least, it is running like a new engine. I'll recommend Mobile 1 10-40 fully synthetic to anyone now. I'll change our other two cars we have to it as well.

Thanks again
 


Welwyn Merx Limited is a family run business with genuine passion, dedication and 25 years of experience dealing with Mercedes-Benz and AMG passenger cars.
Tel: 01707 395999www.welwynmerx.uk
Top Bottom