Blowing fuses!

[Jm123]

Morning Gents,

The fuse that operates my indicators keeps blowing?? It's a 1989 300se auto and i've no idea why it's doing this. I've been away on work for 3 weeks, have come back and when i replace the broken one it works for a minute then blows again.....any ideas??

Thanks

Jim

 

[OZ420SE]

Burnt out wire, causing a false ground?

Check the wires at the bulb connectors.

 

[bigasotonuk]

Hi,
Try removing all the indicator bulbs including the side repeaters (clean and inspect bulb holders and adjacent cabling and earth points) introduce them back into the circuit one at a time operating the indicators after each one is replaced, it sounds like it could be dodgy bulb.

 

[television]

To see if this is a bulb/ wire problem, try the left,then the right. if it blows only in one direction then its a wire/bulb possiblity.

If it does it on both,then we are back to the central indicator control item128

http://www.detali.ru/cat/oem_mb2.as...&L=765.706&CT=F&cat=568&SID=54&SGR=045&SGN=03

Malcolm