Bumper

Status
Not open for further replies.

Merc

Senior Member
Joined
Jan 28, 2002
Messages
313
Reaction score
0
HI All

To get the back bumper off,is it 4 bolts that hold it on,eg 1 (each side) in the "wheel well" at the corners (near the lights),and 1 (each side) just below the light cluster itself?.
I'd say the nuts were about 17/19 ml,is this right,anyone know?

Regards
 
OP
M

Merc

Senior Member
Joined
Jan 28, 2002
Messages
313
Reaction score
0
  • Thread Starter
  • Thread starter
  • #2
Dave/Matt/Andy/whoever?

Have any of you guy's ever removed your rear bumper,how did you do it if you did?,I just to want to loosen the wrong bolts that all.

Regards
 

dave elcome

Senior Member
Joined
Aug 12, 2001
Messages
558
Reaction score
0
Location
Maidstone kent
Merc.

I took the rear bumper off of my old 124 saloon, there were bolts inside the boot, 13mm i think. I'm pretty sure there were some others round the side somewhere, but i've been to sleep since then and forgotten!!

Hope this helps.
 
OP
M

Merc

Senior Member
Joined
Jan 28, 2002
Messages
313
Reaction score
0
  • Thread Starter
  • Thread starter
  • #4
Dave

Thanks for that,like I said I just didnt want to remove anything that wasn't related to the bumper,once again thanks.


Regards
 

Matt Crooke

Senior Member
Joined
Sep 25, 2001
Messages
781
Reaction score
0
Age
48
Location
Essex UK
ive never removed the bumpers im afraid Merc.

shouldnt be too hard i wouldnt think.
 
Status
Not open for further replies.


Comand (Europe) Ltd are the leading specialists in supplying and fitting Comand, Linguatronic, Media interface kits, UHI phone, IPod interfaces and much more.
Top Bottom