Changing Brake Pads on a W164 ML

230K

Senior Member
Joined
Aug 22, 2004
Messages
499
Reaction score
1
Age
54
Location
Belfast
Your Mercedes
E300TD/1998/3.0 Diesel
Hi

Is there anything special to do on a 2006 ML320cdi when changing the brake pads?? Do is need reset on STAR or anything silly?? Can calipers be pushed back like normal, are they brake by wire or anything like the early 211's?????

Neighbour has asked me to change them for him, just havent said yes or no till i investigate.

Anyone???

Thanks in advance,

230K
 

television

Always remembered RIP
Joined
Mar 14, 2005
Messages
164,073
Reaction score
367
Age
89
Location
Daventry
Your Mercedes
2002 SL500, 216 CL500, all fully loaded
Would you like the 2 work sheets on doing this,, nothing to re set
 

jibcl500

Senior Member
Joined
Oct 22, 2005
Messages
6,420
Reaction score
8
Age
56
Location
Cambridgeshire
Your Mercedes
CL500,ML55,SLK280
Front or rear both easy, make sure you clean and remove all crud before fiiting the new pads, only buy MB pads as they come with all the parts you need.

jib
 
OP
230K

230K

Senior Member
Joined
Aug 22, 2004
Messages
499
Reaction score
1
Age
54
Location
Belfast
Your Mercedes
E300TD/1998/3.0 Diesel
  • Thread Starter
  • Thread starter
  • #4
Hi

Thanks folks, was just concerned that it was the SBC or whatever the electric braking system is in the 211 & 230's but if it is a normal hydraulic system and the warning lights do not reset then i will be fine.

Shouldnt need the printout from WIS.

Thanks again,

230K
 


AMF Automotive - We are an independent Mercedes-Benz and AMG specialist located in Paddock Wood, Kent, with full Mercedes Diagnostic equipment. We offer a full portfolio of tuning options for AMGs and can cater for all your Mercedes needs.
Tel: 0203 384 4644www.amfmercedes.com/
Top Bottom