E320 CDI estate 54 W211 Suspension

REVILLP

Active Member
Joined
Jan 6, 2009
Messages
37
Reaction score
1
Your Mercedes
E320 CDI Estate '54 every extra, A140L '53 no extras, A180 CDI 09
Got back in car after a short drive and "Visit Workshop" warning that shows an outline of the vehicle with an arrow in the middle pointing up appears on dash...does anyone known what it means. Car has airmatic suspension. Suspension / drive feels ok...using the switch that shows an outline of the vehicle with an arrow in the middle pointing up raises the suspension...never used this switch before. Thanks everyone...
 
Last edited:

Cole@MBS

Forum Supporter
Authorised Forum Supporter
Joined
Dec 1, 2008
Messages
13,702
Reaction score
950
Age
54
Location
Southampton
Website
www.mbssouthampton.co.uk
Your Mercedes
124 300 CE 24 Coupe, C220CDI, Porsche 911 4s, Dolomite sprint,
Need some fault codes, going be the pump is not making enough pressure due to being burnt out or a axle level sensor...............
 
OP
R

REVILLP

Active Member
Joined
Jan 6, 2009
Messages
37
Reaction score
1
Your Mercedes
E320 CDI Estate '54 every extra, A140L '53 no extras, A180 CDI 09
  • Thread Starter
  • Thread starter
  • #3
Is it ok to drive

Is it ok to drive...if it is the pump or sensor any idea of parts /labour costs might be ... Car has 162k miles on the clock Thanks
 

Cole@MBS

Forum Supporter
Authorised Forum Supporter
Joined
Dec 1, 2008
Messages
13,702
Reaction score
950
Age
54
Location
Southampton
Website
www.mbssouthampton.co.uk
Your Mercedes
124 300 CE 24 Coupe, C220CDI, Porsche 911 4s, Dolomite sprint,
Pump is around £400 but don't quote me on that price, you would need a relay as well, the level sensor might just need a modded bit of wiring. safe to drive until It packs up completely and she sits her ars on the ground.........
 
OP
R

REVILLP

Active Member
Joined
Jan 6, 2009
Messages
37
Reaction score
1
Your Mercedes
E320 CDI Estate '54 every extra, A140L '53 no extras, A180 CDI 09
  • Thread Starter
  • Thread starter
  • #5
Just had a closer look at the car and it appears to be sitting a lot higher than previously...especially at the front...also when 'the button with an image of the car and an upright arrow ' is pressed nothing happens...previously this highered the car I think...does this fit in with the pump failure concept????

Thanks
 

television

Always remembered RIP
Joined
Mar 14, 2005
Messages
164,073
Reaction score
367
Age
89
Location
Daventry
Your Mercedes
2002 SL500, 216 CL500, all fully loaded
On all these systems the height controls never work when the warning is on
 
OP
R

REVILLP

Active Member
Joined
Jan 6, 2009
Messages
37
Reaction score
1
Your Mercedes
E320 CDI Estate '54 every extra, A140L '53 no extras, A180 CDI 09
  • Thread Starter
  • Thread starter
  • #7
Car due for service in 4 weeks time...so will get it checked then....will it be ok to drive until then and not cause any other damage....thanks
 
OP
R

REVILLP

Active Member
Joined
Jan 6, 2009
Messages
37
Reaction score
1
Your Mercedes
E320 CDI Estate '54 every extra, A140L '53 no extras, A180 CDI 09
  • Thread Starter
  • Thread starter
  • #8
All fixed, was 2 * cable harness that was needed (£2.35p ea) + diagnostics + labour...so good resuilt. Thanks
 


AMF Automotive - We are an independent Mercedes-Benz and AMG specialist located in Paddock Wood, Kent, with full Mercedes Diagnostic equipment. We offer a full portfolio of tuning options for AMGs and can cater for all your Mercedes needs.
Tel: 0203 384 4644www.amfmercedes.com/
Top Bottom