The ESP control module can get oxidation on the contacts of the ESP module, the fix is to replace the wiring to the module, the fault is on pins 3-5-7 in the connector. I would get a good quality switch cleaner -lubricant and clean them up and see how that goes.
The fault code is C1185 if you have the codes read out.
This must be the easiest thing to try yourself, there other faults listed, but this one fits the bill
Malcolm,
Very grateful to you. I will try this to-morrow and come back to you with the result. Good of you to take the time so late at night. ' Over & out for tonight'
Again, mant thanks.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.