I asked the question because I have an A160 that clonks once if I pull away reasonably quickly and will also then clonk [once] on the overrun.
I can reproduce the noise with the car stationary by increasing the idle speed and then selecting D or R.
The clonk can be felt through the driver's side front engine mount [ the one attached to the cylinder head] and clearly heard on the subframe [ using a long screwdriver as a kind of stethoscope].
Changing the engine mount had no effect. I am now wondering about the front anti roll bar rubbers particularly as the anti roll bar clamp is situated directly below the engine mount where the clonk can be felt.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.