front wings

[north-star]

looking for either straight merc wings, decent copies or fancy fibre glass jobs with air intakes built in for a w208 clk.

i tried europarts for the standard ones but they are sold out, anyone with any ideas or liks to websites which may be able to help out?

thanks, paul

 

[television]

Are you changing because of rust

 

[north-star]

yes afraid so, drivers side has started to bubble leaving small holes when rubbed down, getting a full re-spray so want to change them out so i get a proper job.

 

[television]

yes afraid so, drivers side has started to bubble leaving small holes when rubbed down, getting a full re-spray so want to change them out so i get a proper job.

If the rust is not too bad,,it could work out cheaper and better to have new metal welded in

 

[north-star]

it's a few small bubbles of rust that i scraped off then rubbed right back to bare metal, i then treated the rust and filled the holes and primed only for the rust to come back again about a month later........not as bad as it was though but noticable although the areas were never finished properly with top coat or laquer!

i'll look into what you have mentioned

paul

 

[television]

Primers are not waterproof unfortunately