JamieCraig
New Member
- Joined
- Aug 22, 2003
- Messages
- 2
- Reaction score
- 0
I have a mercedes 280E .114 type. To date i am finding it very difficult to obtain any information on it
it is 1975 on a P reg .
The car was running in near perfect condition when i decided to take it to my local garage to have
the oils replaced ie engine transmission and steering.
This was when problems started.
there is a small unit to the left near air filter inside is a pcb.and a single wire from this has been cut
I cannot get workshop manual to help me out ,could you please advise in any way
the car will now start but when accelerating it gives no responce thankyou
jamie craig
it is 1975 on a P reg .
The car was running in near perfect condition when i decided to take it to my local garage to have
the oils replaced ie engine transmission and steering.
This was when problems started.
there is a small unit to the left near air filter inside is a pcb.and a single wire from this has been cut
I cannot get workshop manual to help me out ,could you please advise in any way
the car will now start but when accelerating it gives no responce thankyou
jamie craig
