A210AMG
Senior Member
- Joined
- Mar 12, 2007
- Messages
- 583
- Reaction score
- 1
Hello,
I have a two sensor system for my ml and thought I could put the sensors in the rear bumper 'flaps' where the spare wheel carrier would be.
The system has a control box that the display / buzer connect to and then the sensors plug into the box.
the box itself has only two wires (black and red)
Red is for the reversing sensors and the black is an earth.
My question..
What colour wire is the reversing light that I can connect my red wire to. Also can I fit that with out setting off a bulb out warning on the dash?
thanks
I have a two sensor system for my ml and thought I could put the sensors in the rear bumper 'flaps' where the spare wheel carrier would be.
The system has a control box that the display / buzer connect to and then the sensors plug into the box.
the box itself has only two wires (black and red)
Red is for the reversing sensors and the black is an earth.
My question..
What colour wire is the reversing light that I can connect my red wire to. Also can I fit that with out setting off a bulb out warning on the dash?
thanks
