Plastic fixings for underside - ML270

[truthfindergeneral]

The various trays on the underside of my 2004 ML270 have been held in place by some small plastic stoppers with a screw thru the middle. Managed to break several them removing tray for an oil change today. Dealer only part or are there other options ? About the size of a penny.

 

[dava]

You can get spurious ones but the correct ones are coppers and they fit, the others have to be adapted.

 

[Mark A]

Just get yourself down to the dealers, they are not that expensive. I haven't found any non OEM ones that don't ping off after a few days.

 

[psmart]

Part Number :- A 163 990 02 92 Rivets, they cost approx 50p each.

I replaced all the ones on mine as weathering ages them and makes them brittle. They arent actually screws but friction fit, so yu lever the center up with a fine blade until you can get some pliers on them, then pull down and the whole inner and outer comes out.