1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

plastic sill at bottom of doors

Discussion in 'Bodywork, Tyres, Wheels & Trim' started by Petemac, Nov 24, 2012.

  1. Petemac

    Petemac Senior Member

    Messages:
    153
    Likes Received:
    0
    Joined:
    Jan 12, 2012
    Location:
    Inverness
    Your Mercedes:
    merc c250TD 99/2000 150000MILES ON CLOCK GREAT CAR
    i would like to remove plastic sill to under seal behind it can any body advice me on method for removal thanks peter
    its a 99/2000 c250td
     
  2. bigasotonuk

    bigasotonuk Senior Member

    Messages:
    5,243
    Likes Received:
    9
    Joined:
    Nov 14, 2006
    Location:
    Southampton UK
    Your Mercedes:
    C43/55 AMG 1999 / C230K 1997
    Hi,
    From memory, there are 8 or 9 plastic screws under the car along the length of the side skirt, the black trims on the front wings and rear arches just pull out of plastic grommets that are in the body work, there are also 3 or 4 screws under the car attaching the splash liner to the sill. Be prepared to see some rust, mine was rotten!
    This diagram might help,
    http://www.neoriginal.ru/cat/mb/part_202033_1_1_44V_202_033_/69_060__2
     
  3. OP
    Petemac

    Petemac Senior Member

    Messages:
    153
    Likes Received:
    0
    Joined:
    Jan 12, 2012
    Location:
    Inverness
    Your Mercedes:
    merc c250TD 99/2000 150000MILES ON CLOCK GREAT CAR
    thanks for your help all the best peter
     

Share This Page