Flying Scot
Senior Member
- Joined
- Mar 24, 2006
- Messages
- 610
- Reaction score
- 1
- Location
- MOZZERWELL North Lanarkshire
- Your Mercedes
- SL 500 R129 1995
Having a wee electrical and a seat trim/fit problem and dont know if the two are related.
The passengers seat squab is not heating but the back rest is - the drivers seat is fine. There seems to be a problem with the fitting locating of the drivers backrest though it is half in and half out one prong behind and one in front of the location cross member. The passengers back rest popped 'out' a month or two ago and with a little effort i got it back in - i dont remember how i did that now but i suspect this will have something to do with the seat cushion not heating. It would appear that the back rest was not sitting in properly and the two prongs about 3/4 of the way up the backrest were not located behind the steel bar that they are supposed to be in so the backrest cushion simply popped out. Looking at both seats today the passengers backrest is located fine but the drivers side has one prong in and one out.
SO how do i dismantle and rebuild the seats also what connectors/relays/wires operate the seat squab and backrest heating.
i did post something similar in the electrical section
Thanks in anticipation
The passengers seat squab is not heating but the back rest is - the drivers seat is fine. There seems to be a problem with the fitting locating of the drivers backrest though it is half in and half out one prong behind and one in front of the location cross member. The passengers back rest popped 'out' a month or two ago and with a little effort i got it back in - i dont remember how i did that now but i suspect this will have something to do with the seat cushion not heating. It would appear that the back rest was not sitting in properly and the two prongs about 3/4 of the way up the backrest were not located behind the steel bar that they are supposed to be in so the backrest cushion simply popped out. Looking at both seats today the passengers backrest is located fine but the drivers side has one prong in and one out.
SO how do i dismantle and rebuild the seats also what connectors/relays/wires operate the seat squab and backrest heating.
i did post something similar in the electrical section
Thanks in anticipation
