Rear Sensor - S320L - 1998. Help Please?

[JEZ.S320L]

I wonder if anyone can help/advise, please.

Today, I noticed that one of the rear sensors has been 'pushed back' into it's housing.

The sensor in question, is the offside one which faces to the rear.

The housing in which it sits, appears to 'clip' onto the rear bumper.

Is it easy to take off and push the sensor back to its flush-fitting position, or is it more complicated than that?

I am reluctant to try and force it, as I don't want to snap or break anything.

Anyone out there who can advise, please?

Thanks.

 

[Xtractorfan]

You should be able to get a hand up behind the bumper and push the sensor back into place, a ramp or lift will be handy, the sensor should clip back into its socket..if jacking the car make sure you use axle stands

 

[JEZ.S320L]

You should be able to get a hand up behind the bumper and push the sensor back into place, a ramp or lift will be handy, the sensor should clip back into its socket..if jacking the car make sure you use axle stands

Many thanks, Xtractorfan - I will give it a go.