Removing Upper Balljoint Arm!!!!!!

[slaterjas]

I have a 300se 126 Need to replace the Upper Balljoint arm. Undone the balljoint, taken off the rubbers from anti roll/steady bar? which goes through. There is now one long bolt which holds arm on reached from inside the engine compt. I thought it would simply knock through - but it doesn't any ideas????? Help appreciated

 

[paganene]

Hi slaterjas, try turning bolt to free may be rusted, then put nut back on and try to hammer out, good luck.

 

[slaterjas]

Thanks for reply eventually had to use hacksaw blade and saw through both sides of the bolt it was completely rusted into the bush!!