Speed signal, can bus

[evo]

Hi to everybody here . I have a small problem- I install taxi meters in the Mercedes Benz cars. But recently I have been struggling to get information from Mercedes Benz themselves about the new cars and where the signal comes from. In the old MB cars a speed signal can be found behind the radio,probably in the models up to 1999-2000 year. My question is- can somebody help me with information where can I get a pulse signal in the MB cars from year 2000 up to year 2007 for the E and C class ? I know that some models of the new ones require a can bus interface unit, which must be connected so that the taxi meter can get a proper signal-I have such units, and the info I have is that I must connect them in the fuse box in the engine compartment where there are 2 wires- green and green-white- CAN HI and CAN LO . But how do I determine which model will require a canbus and which one do not ? The guys from Mercedes Benz here are not willing to help me at all, as you know, the car manufactories are notorious for not allowing anything to be connected to the cars after they sell them. But my meters are approved for Mb cars, but I can not get info as to where can I find the speed pulse signal for the different models throughout the years from 1999 -2007 and which ones need a can bus and which ones do not need one?
Please guys,any info will be helpful, my email is bgboy@telkomsa.net if somebody wants to ask me more questions, you are welcomed to send me an email.
Thank you

 

[television]

I will give you some answers later in the day or over the weekend.

Malcolm

 

[evo]

Hi, Malcolm
Thank you for your reply. Any info you may help me with, i will be gratefull. You are free to contact me directly on my email. Any information you would want to ask me-please do so.
Have a nice day.

 

[Steve Taxi]

Have sent you email evo re meter fitting in W203

 

[evo]

Good morning guys, if anybody has some information about my question,please help me, I have this car now- WDB 211 E200 COMPRESSOR, 2006 YEAR - does it need a canbus unit and if yes- where are the wires for it? If it does not need a canbus unit, can you please tell me where can I get a signal from? Is there a wire with a normal pulse signal,or not? I would like to install the F2 Digitax meter on this car-this will be my first installation of a meter in a new car, I have been installing meters in older models, but never in a newer one from 2006 year.

 

[television]

The speed signal is in the left footwell


I dod not get a Email from you.

Give me yours

malcolm

 

[joe147]

Could you help me evo, on the 98 mb e200 aventgaurde is the pulse wire behind the radio? what colour? putting a taxi meter in, any help would be great

 

[joe147]

pulse

Could anybody help i am fitting a taxi meter in '98 mb e200 aventgaurde, is the pulse wire behind the radio? What colour? Any help would be great, thanks

 

[cleverdicky]

Hello mate, just curious.
Do you drive the Taxi's as well?

rgds

 

[joe147]

only new to this site dont know what i am doing at the mow, just trying to find this pulse wire, yes 13 years driving, i hope not for much longer!!!!

 

[television]

Could anybody help i am fitting a taxi meter in '98 mb e200 aventgaurde, is the pulse wire behind the radio? What colour? Any help would be great, thanks

It should be in the passenger side kick plate.

I can print off the details later if you wish

 

[joe147]

you are a gentleman, i shall av a look later, o if you could send the details that would be fab Malcolm

 

[television]

2 Papers sent via Email

 

[joe147]

Cheers Malcolm, I got your email
Thanks
Joe

 

[television]

Cheers Malcolm, I got your email
Thanks
Joe

Just use the info that you need from it