sprinter 413 injector sealing problem?

[barryw]

hi,
i recently removed the injectors on my p, reg 413 srinter. I have now refitted them only to notice a loss of power. I have fitted new washers and clamps as recomended, but there seems to be a leaks around injectors maybe causing lack of power? When i sprayed wd40 around the injector i could see it bubbling? Cant seem to gat them to seal whatever i try? Only other thing i removed was the manifold to give it a clean inside and refitted with a new gasket. Has anyone experienced similar problem please? Thanks barry

 

[Xtractorfan]

Did u ensure the injector seating in the head was spotlessly clean before fitting the new seals. Blow past can cause these to coke up and the new washers wont seal properly.

 

[barryw]

hi, thanks for reply. I made sure seting in the head was spotless and on the injector. This has me puzzuled????

 

[Xtractorfan]

Have a look at ''ML270 Injector seal leaking'' on this page and u will see that there is a tool for cutting the seating for the injectors also give blackc65 a ring his number is on there.. he seems to know things that mere mortals dont

 

[barryw]

Hi, Thanks for your help, i will gert in touch with him. Many thanks Barry