Steering wheel peeling

[bertb1]

Hello all
I’m after an idea what to do with the steering wheel peeling
It’s not to bad but really getting on my nerves
Anybody have any ideas?
Thanks in advance

Sent from my iPhone using Tapatalk

 

[Flyinspanner]

Good replacement?

Wonder if that bit can be vinyl wrapped?

Or if it can be detached, sand & sprayed or hydro dipped?

 

[bertb1]

Good replacement?

Wonder if that bit can be vinyl wrapped?

Or if it can be detached, sand & sprayed or hydro dipped?

Thanks
I was thinking about wrapping
I was wondering what I could do just to stop it before getting worse
Don’t want to spent a load of money if possible
I know it’s should be done right but funds are a little light at the moment


Sent from my iPhone using Tapatalk

 

[mioba]

If funds are tight I would live with it.
I can’t see that being done well without costing a fair wack.
To maybe stop it perhaps a little tape over it (not with a strong adhesive) as you don’t want it peeling all the layer off once removed.
Pretty strange delamination that.

 

[bertb1]

If funds are tight I would live with it.
I can’t see that being done well without costing a fair wack.
To maybe stop it perhaps a little tape over it (not with a strong adhesive) as you don’t want it peeling all the layer off once removed.
Pretty strange delamination that.

Cheers
I was thinking about some black tape and just covering it and the using a scalpel to cut the back to suit the steering wheel
It would only be around 12mm x 150mm strip and it will be covered


Sent from my iPhone using Tapatalk