Smaltze
Senior Member
Hello!
Im going to be CNCing my own wheel spacers, (i do know what im doing dont worry).
I hoping someone knows the exact dimensions for the stud pattern.
standard 5x112, w210 eclass.
i know the studs are 12mm, i know the centre bore is 66.1mm
I just want to know the layout of the studs, exactly where they sit in relation to each other..
How far apart are they, perhaps from centre to centre, etc etc, all this so i can map it all up in CAD.
I will try to work it out myself through some various ways but im hoping someone can tell me as much info as they can.
Thanks!
Im going to be CNCing my own wheel spacers, (i do know what im doing dont worry).
I hoping someone knows the exact dimensions for the stud pattern.
standard 5x112, w210 eclass.
i know the studs are 12mm, i know the centre bore is 66.1mm
I just want to know the layout of the studs, exactly where they sit in relation to each other..
How far apart are they, perhaps from centre to centre, etc etc, all this so i can map it all up in CAD.
I will try to work it out myself through some various ways but im hoping someone can tell me as much info as they can.
Thanks!
Last edited: