Trim Fitting

[ouchie]

The "headlining" surrounding the bonnet release under the dashboard in my C200K Coupe (2004) keeps dropping into the footwell. It is a shaped piece of trim backed with thick felt. Any ideas on how it can be fitted back in place I cannot see any obvious clips etc.
PS Members might like to know that Haynes have just published an updated guide on the Mercedes C Class (up to 07) No.4780.
ouchie

 

[television]

Is it in the link

http://www.detali.ru/cat/oem_mb2.as...605716.628&CT=F&cat=66U&SID=68&SGR=205&SGN=05

 

[Cole@MBS]

It slots in at the rear and held in with 3 trox screws at the front!!

 

[ouchie]

Footwell Trim

Thank you both for the helpful replies and diagram. I will probably have to remove the three screw at the front and then try to locate the slot at the rear which is clearly the problem. I assume that this will not upset the bonnet lever and what I believe is the test computer port!

 

[television]

When fitted correctly , no it will not upset anything

 

[ouchie]

Thanks, job done but slight mod on my model. There was no rear slot but mid point on the back of the trim was a plastic clip wich hooked over a plastic ledge under the dashboard area. This had to be engaged while lining up the front screws. I now realise that this trim was probably not fitted back correctly when I had the clicker on the parking brake replaced.
ouchie

 

[300-SL-107-1987]

looking for sl 107 trim clips for crome mounting ????