The left mainbeam fuse failed. I removed the old fuse and cleaned out the fuseholder, inserted new fuse. Still no lamp function. Replaced bulb just in case. The highbeam works so there is power at the lamp. Is there any other fuse or likely failure point to look at?
W124 main beam fuse/lamp problem
- Thread starter Slowtack
- Start date
teddycatkin
Senior Member
- Joined
- Mar 7, 2008
- Messages
- 2,093
- Reaction score
- 5
- Location
- cheshire cheese country
- Your Mercedes
- W107-SL W124-220te W123-230e W201 2.0
bad earth?
television
Always remembered RIP
- Joined
- Mar 14, 2005
- Messages
- 164,073
- Reaction score
- 367
- Age
- 89
- Location
- Daventry
- Your Mercedes
- 2002 SL500, 216 CL500, all fully loaded
If the fuse had blown, then as STAR check the wire in the lamp holder
- Thread Starter
- Thread starter
- #5
Found the problem - The lampholder and wiring are OK. The metal seating cup insert in the fuseholder has crumbled away, resulting in a loss of contact at the base of the fuse. The screwed wiring connection underneath is fine.
I notice the right hand low beam holder cup is also deteriorating. All the other fuseholders are OK. Can I get a replacement for the small metal cup?
I notice the right hand low beam holder cup is also deteriorating. All the other fuseholders are OK. Can I get a replacement for the small metal cup?
As a member of ourMercedes Owners' club, you will enjoy numerous savings on an expanding range of services including, Insurance, Parts and Servicing, RAC Membership plus much more.MBOmembers can save around £200.00 a year. You can join from as little as £30.00 and start to enjoy these savings immediately. You receive our monthly magazine and free classified ads when you decide to trade up a model.