W211 Lauch scan interpretation please

[Grover2000]

Hi guys I have paid for a scan from a friend of a friend and have some codes.

The car is showing 6 malfunctions on the dash and ABS light lit on the dash.

ABS defective visit workshop
Brake defective visit workshop
ESP defective visit workshop
Cornering headlight


The car was scanned using Launch and the findings are as follows:

P2402
P2403
P1876
P2012
P2010
0105
2333
2045
C144E
C150E
C2134
C2452
C249F
C225C
C2235
C2412

Any help on the interpretation of these fault codes is greatly appreciated

Grover

 

[television]

I think you have an ABS fault, this will put on the BAS and ESP as they run in ABS

 

[Alex Crow]

One that jumps out at me is the C249F, which IIRC means the SBC unit has 'timed out' - but that will not account for the warning displays you describe.

How much did you pay a friend of a friend for this? not too much I hope!
I thought the X431 was better than that, with actual text definitions - or have you just not recorded them?

 

[Grover2000]

Hi guys I have attached the following receipts that were given to me




Sorry for not attaching these earlier

 

[Alex Crow]

Hi guys I have attached the following receipts that were given to me

View attachment 24205
View attachment 24206

Sorry for not attaching these earlier

Not working for me -just links to a 'Russian Bride' site - got me thinking though...

 

[television]

Rather odd as most point towards both front wheel sensors

Yes the pump running time is up by the look of it

 

[Grover2000]

Would it be wise to get both wheel sensors replaced initially?

As for the pump the dash does not display the red Stop light so is it safe to ignore this for now or to just get it reset depending on the condition of the pump?

Any help is greatly appreciated.

 

[Alex Crow]

With front wheel signal faults on the w211, it is often the seal at the back of the bearing, especially if the front hubs have been off.