Richard Moakes
Senior Member
- Joined
- May 19, 2002
- Messages
- 2,198
- Reaction score
- 1,160
- Location
- Newton Abbot, Devon, UK
- Your Mercedes
- CL500; ML500
It doesn't look good if there is no return voltage. From what I can remember, if you open up the sensor, you will see the wires connected to a board from which the weight and strain gauge is suspended in a bath of oil. I can remember there being some very fine wires from the board to the strain gauge and I found one of them had broken. I attempted to repair it with solder, but it didn't last very long and I ended up buying a new sensor.