Benzworx CLK 430 Project

[Benzworx]

Hi All,

just to let everyone know over the next few months I will commence on the
Benzworx CLK project which will include:

1/ Rust treatment
2/ colour change
3/ Benzworx Bumper front/ rear mods
4/ Interior Benzworx exclusive two tone seats and headliner
5/ Engine ? change or remap ?
This will be just the start more to come

Clive

 

[Sonic27]

Ideal.
I do like a project!

 

[Tazz666]

I will be keeping an eye on this project

 

[GAD Tuning LTD]

What ever you need from us clive! Just call.

Regards

Anthony

 

[NW_Merc]

Clive why not supercharge the 4.3 lump you already have rather than a remap. Or remap it after supercharging.

 

[Benzworx]

Thanks NW will be talking to Gad tuning about that

 

[mark.s]

Hi Clive, as discussed on the phone, looking forward in the feature.

 

[Benzworx]

Benzworx CLK

The first stages start :-

Before and after Lowering

 

[Benzworx]

Benzworx CLK

Next step New MB front wings prepared and paint inside and out
with Epoxy primer this is the only way to prevent any moisture getting
to the metal and will guard against any stone chipping back to bare metal
as the primer is rock hard unlike normal 2K primers

 

[NW_Merc]

Just a question Clive with regards to the epoxy primer. Can this be used on bumpers too before the final colour coats?

 

[Benzworx]

Just a question Clive with regards to the epoxy primer. Can this be used on bumpers too before the final colour coats?

Yes it can just use it in the normal way as 2K primer

 

[Naraic]

Can the DIY guy get the epoxy primer in a spray can? And can it be sprayed over other primer...such as the primer on the wing when it is new?

 

[Benzworx]

http://www.ebay.co.uk/itm/Novol-Spe..._Body_Shop_Supplies_Paint&hash=item2a2cc6b8a4

yes you can this stuff is very good

 

[Naraic]

http://www.ebay.co.uk/itm/Novol-Spe..._Body_Shop_Supplies_Paint&hash=item2a2cc6b8a4

yes you can this stuff is very good

Thanks, I've just ordered it...

 

[NW_Merc]

They've run out goddammit

 

[Naraic]

They've run out goddammit

...gotta be quick...:lol:

 

[Benzworx]

It is a very spray can epoxy and i do use this so can vouch for it,
but as i have spray guns i use the mix as you go stuff.
By the way There Lacquer system VHS is the doggy's do dah's
and will be using this for the project

 

[paul hayward]

will look forward to the next update

 

[bigasotonuk]

Why don,t you go the whole hog and do what I did to my C43 and put a 55 lump in it, afterall its just a straight swap.

 

[paul hayward]

Why don,t you go the whole hog and do what I did to my C43 and put a 55 lump in it, afterall its just a straight swap.

let hi at least get the bodywork done first Andy:lol: