engine

Hi All, I wonder if anyone can point me in the right direction. I've just purchased a 1969 250ce that I wish to completely restore it. First on the list is to get it running! It needs a bottom end rebuild and I wanted any suggestions of good and reasonable places which could carry this out. I...

Hi guys, I need your help! I have a clk 320 petrol, 2002 with approx 84000miles. I went to start the car today however it didnt start!!!! Never happened to me before? any suggestions as to what the problem could be?? Thanks in advance

Hi, I recently bought a A140 1999 reg Elegance. I have noticed sometimes (usually after the car has been left for a few hours) That the engine Revvs itself after i have started it (this lasts for 30secs to 1min maximum). I have watched the rev counter and there is definitely movement. This does...

I have a Mercedes V Class 220i. I have a major problem with it. While I am driving it cuts out, there is no regular pattern to this happening, it does it when it feels like it. When it happens the EDC light comes on the dash, no engine management light comes on. You wait 30 - 60 seconds and it...

Hi, I have an intermittent problem on my 2001 SLK 320 whereby the engine will turn over and over but won't start. Seems to be when engine has been running. Other occasions it is fine. Have read on the forum about immobilisers, ECU's, fuses, keys etc .... Quite a frustrating problem and I...

I am new to this site and this is my first post. I have a 2001 (Y) registered E240 Elegance which looks and drives very well having covered some 72k miles. The last 'B' service was done at a local independent leaving my wallet significantly lighter and this time would like to have a bash at it...

Help! About 2 weeks, the car wouldn't start. Out the blue one morning engine turns over no problems, but not a hint of running. Checked all the fuses, and found the rear fuses near the battery and the location of the fuel pump relay - and searched the web. Found the crank position sensor...

hi all. I have a A140 that is mis firing and wont run. By the forums I think its the ecu. but i dont know how you get the fault code up on the dash? probly easy sorry.