richcrane01
New Member
- Joined
- Aug 13, 2016
- Messages
- 4
- Reaction score
- 0
- Your Mercedes
- C250 AMG
Hi,
Hoping for assistance. I recently undertook a re-map on my 2013 C250 AMG Auto Box which has the Delphi 3.10 ECU. Results were ok until I pushed the car hard and then it went into limp mode. Codes advised the torque converter had exceeded permissible limits and a load of other codes relating to communication from the ECU.
After the initial code clear the car returned to a drivable state but as soon as I pushed hard again the car returned back into limp mode this time not allowing the codes to be cleared and leaving me with a dead car. Car has been back to Mercedes who advised a total software failure of the ECU requiring a software overhaul and a tasty bill.
I'm now left with a standard car and a huge bill but still wishing to get more performance. Can anyone advise what could be wrong and where to go from here?
Thank you.
Hoping for assistance. I recently undertook a re-map on my 2013 C250 AMG Auto Box which has the Delphi 3.10 ECU. Results were ok until I pushed the car hard and then it went into limp mode. Codes advised the torque converter had exceeded permissible limits and a load of other codes relating to communication from the ECU.
After the initial code clear the car returned to a drivable state but as soon as I pushed hard again the car returned back into limp mode this time not allowing the codes to be cleared and leaving me with a dead car. Car has been back to Mercedes who advised a total software failure of the ECU requiring a software overhaul and a tasty bill.
I'm now left with a standard car and a huge bill but still wishing to get more performance. Can anyone advise what could be wrong and where to go from here?
Thank you.