e230 abs brake problem.

shab

New Member
Joined
Aug 10, 2009
Messages
4
Reaction score
0
Just acquired an e230 merc. It has two problems.

1. Just last week it developed a problem with the brakes. Basically when you press the break pedal it sounds as though the abs pump has kicked in - in normal driving/braking conditions. Also there is NO judder on the pedal. It is a sensor, fuse or relay that needs to be changed or something else? There are no warning lights on the dash....

2. On rare occassions the engine power dies and all the warning lights 'light up' on the dashboard. This only happens momentarily - but quite frightening when in the otside lane of the motorway!!!

Any advice welcomed.

Shaz.
 

television

Always remembered RIP
Joined
Mar 14, 2005
Messages
164,073
Reaction score
368
Age
89
Location
Daventry
Your Mercedes
2002 SL500, 216 CL500, all fully loaded
Very hard to say on the brakes,, servo problem possible.

The power going and dash lighting sounds like a faulty ignition switch
 


GAD was founded in 2009 where we developed bespoke ECU Remapping software for motorsport clients, moving forward, we have extended to road vehicles for both performance and economy,
contact GAD Tuninghttp://www.GADTuning.co.ukto discuss your requirements.
Top Bottom