Nuts and Bolts

[joderest]

Hi All
Could one of you cleaver people find out what part number the bolts are that hold the upper control arm to body on ML270. Its two bolts and two nuts as far as i remember.
I plan to replace the arm on right side in the summer, and i know that i will have to use an angle grinder and cut the bolts (they are rusted solid).
Ebay did not really give me a clue, lots of control arm bolts, but none for ML270 (or i could not find them)
If not, size etc !!!!

Thanks

 

[mioba]

look on the IPL sites like 7zap

 

[Oldspanners]

Hi All
Could one of you cleaver people find out what part number the bolts are that hold the upper control arm to body on ML270. Its two bolts and two nuts as far as i remember.
I plan to replace the arm on right side in the summer, and i know that i will have to use an angle grinder and cut the bolts (they are rusted solid).
Ebay did not really give me a clue, lots of control arm bolts, but none for ML270 (or i could not find them)
If not, size etc !!!!

Thanks

I'm not clever but have a look at this it may help.
https://mercedes.7zap.com/en/eu/fg/car/m-klasse/ml+270+cdi/06h/163113/fg/0/0/33/0/225/0/0/

 

[joderest]

Thank you, will run part numbers and see what I get