camshaft position

  1. E

    CLK 200K P0010 Camshaft Error

    Hi, I have recently bought a 2005 CLK200K with 86K miles. Had the engine light on when I bought it. I inspected the issue and had codes for the camshaft intake hall sensor, but both of the camshaft magnets were leaking. I changed the three sensors however, I still have the engine light on. I’m...
  2. D

    MB Recall results into P001685 (camshaft)

    Hey, my first post here. I was wondering if someone could make sense of the following or had a similar issue: I bought a C200 (2015) a couple of months ago, which had an MB recall for a software update. Dropped the car at the MB, which did the below two software updates: SRPC2044 Alternator...
  3. A

    Help - M271 Engine Rough Idle, Misfire Codes P0301-303, P0325 Knock Sensor, P0341 Cam Pos Sensor

    Mercedes C180K - 2006 (W203) Engine M271 100,000 miles My C180K will not start and if it does it sounds like a diesel tractor and runs rough. Can anyone help me detect the reason because due to Covid 19 i can't take it to a garage and i need the car to use to shop etc. It all started the one...
  4. J

    camshaft breaking

    I have just replace my cylinder head gasket on my H reg 200TE and had the engine running very nicely for a couple of hours when the camshaft broke just in front of the no. 1 rocker. I got a replacement and fitted it together with two new valves, put it all back together again ran the engine for...
  5. Alex Crow

    272/273 timing gear wear problems!!

    i have not read or heard anything about this problem before so i thought i would share it with you all. certain versions of the 272/273 generation v-engines have a problem with timing gear wear, that is excessive wear of the gear mounted in the center of the 'v'. on the 272 this gear is used...


www.W140.co.uk&www.r129.co
Specialist in parts for W140 and R129 Mercedes-Benz models.
Top Bottom