E280 Indicators?

Beerhunter

New Member
Joined
Feb 25, 2007
Messages
2
Reaction score
0
We have a 1995 E280 Estate with an indicat r problem that is driving (sic) my partner nuts.

Every so often the indicators just stop working. When that happens the rear screen demister and hazards also pack up. I've tried reseating that huge relay in the relay box which seemed to help for a while and then it happened again. Any ideas anyone as she is threatening to sell the car which would be a problem for me because I like it.
 

kth286

Senior Member
Joined
Nov 4, 2002
Messages
3,067
Reaction score
3
Your Mercedes
E320 Coupe 95
It is quite likely a fuse corroded. A known Merc foible. Very often worse when the weather is damp.

Twist the fuses in their holders.

Replacement of corroded fuses is the eventual cure, and you can buy packs from the Dealer.
 

television

Always remembered RIP
Joined
Mar 14, 2005
Messages
164,073
Reaction score
368
Age
89
Location
Daventry
Your Mercedes
2002 SL500, 216 CL500, all fully loaded
Hello and welcome. The fault is in or around the N10 box that you have been playing with. not normall to get everything going so it would appear to be bad contacts in the holder of the relay box. Get a good switch cleaner and lubricate all of the contacts and fuses.

Malcolm
 

cyps

Senior Member
Joined
Jan 17, 2006
Messages
122
Reaction score
0
We have a 1995 E280 Estate with an indicat r problem that is driving (sic) my partner nuts.

Every so often the indicators just stop working. When that happens the rear screen demister and hazards also pack up. I've tried reseating that huge relay in the relay box which seemed to help for a while and then it happened again. Any ideas anyone as she is threatening to sell the car which would be a problem for me because I like it.



Simply tell her to use hand signals to erradicate this issue
 

dean fitton

Senior Member
Joined
Dec 3, 2004
Messages
91
Reaction score
0
Location
N.Yorks
Your Mercedes
A140 (AMG wannabe), E300 TD, S320, E280 (dead but not forgotten)
also inside the big black box. If you open it you may find alot of dry joints on the edge of the circuit board. Try resoldering. Dealers can only supply new ones. Wont repair old ones.
 
OP
B

Beerhunter

New Member
Joined
Feb 25, 2007
Messages
2
Reaction score
0
  • Thread Starter
  • Thread starter
  • #6
Thnaks guys - terrific response. I've already twisted the fuzes. I guess I'll try replacing any that go to the GP relay and indicators then and have a look at that circuit board. How does it come out? Easy or hard?
 


GAD was founded in 2009 where we developed bespoke ECU Remapping software for motorsport clients, moving forward, we have extended to road vehicles for both performance and economy,
contact GAD Tuninghttp://www.GADTuning.co.ukto discuss your requirements.
Top Bottom