Wighty
Senior Member
- Joined
- Aug 4, 2016
- Messages
- 13,480
- Reaction score
- 12,542
- Location
- Sunny Essex
- Your Mercedes
- W211/E320cdi/2009 and CLK200k 2009
Hi Folks ,
I've been thinking again of fitting an oil catch can to the pcv tube before it goes into the turbo intake on my E320cdi om642 engine .
A few months ago I changed the turbo inlet seal and the orange pcv seal , I used liquid soap and it has remained cleaner that I have ever seen it , but there is still some slight oil contamination below it . I wonder if by fitting a catch can , it will stop ALL oil going into the turbo and therefore leaking down on to the electrics below the turbo .
Has anyone done this or got any views either way .
I've been thinking again of fitting an oil catch can to the pcv tube before it goes into the turbo intake on my E320cdi om642 engine .
A few months ago I changed the turbo inlet seal and the orange pcv seal , I used liquid soap and it has remained cleaner that I have ever seen it , but there is still some slight oil contamination below it . I wonder if by fitting a catch can , it will stop ALL oil going into the turbo and therefore leaking down on to the electrics below the turbo .
Has anyone done this or got any views either way .