- Joined
- Mar 25, 2010
- Messages
- 15,148
- Reaction score
- 6,325
- Location
- Tonbridge
- Your Mercedes
- W221 S65 AMG - W204 C63 AMG + Various other MB's
- Moderator
- #1
1 x o ring and 1x pintle cap (pastic), fell past slightly open inlet manifolds when removing the fuel rail. How important is it that they are removed.
The o ring is an o ring. The pintle cap is a flat plastic piece approx 5mm in diameter:
I have managed to locate it with a borescope through the spark plug hole but not had much luck in removing it. Its located in such a place where I cannot see it and use a tool to remote it.
I tried a rubber hose on a hoover and manged to pick it up, but then dropped it again.
The o ring is an o ring. The pintle cap is a flat plastic piece approx 5mm in diameter:
I have managed to locate it with a borescope through the spark plug hole but not had much luck in removing it. Its located in such a place where I cannot see it and use a tool to remote it.
I tried a rubber hose on a hoover and manged to pick it up, but then dropped it again.