1983 300d vacuum problems

[xxbxrxextxtxx]

i recently changed my oil because my engine is running ridiculously rough while t idle. so whene i was changing my oil i pushed some vacuum lines out the way and i accidentally pulled one out of under my dash from trough the firewall. its a black tube and i dont see ware it came from. it goes trough the firewall by the oil filter

 

[television]

This will be hard to work out,,could be from the heating flaps

You will have to see what is not working,all of your vacuum is in the link, they all open from BM half way down the page

http://www.detali.ru/cat/oem_mb1.as....005++++++++++++++717.400&CT=F&Cat=222&SID=80

 

[xxbxrxextxtxx]

i went trough everything it seems to be working everything but my car just wont shut off

 

[Nat King]

oops wrong post

Nat

 

[television]

i went trough everything it seems to be working everything but my car just wont shut off

There is a vacuum shut off valve on these engines and the pipe comes from the ignition switch

 

[xxbxrxextxtxx]

i have taken the lower part of my dash off do i have to take the upper dash out to get at the ignition vacuum line

 

[television]

I will have a look for you

 

[xxbxrxextxtxx]

does anyone else have an idea?